[WTS] [AutoBuy] - Goldshell Box ASIC Root Password (working SSH) - ST-Box/LB-Box
Listing: https://shoppy.gg/product/g4aoDy4
Some Goldshell Box ASICs have the SSH service open. With the root password you are able to remote into the miner and basically change anything. Here's what I've found so far:
**Working** on latest firmware:
Goldshell **STCBox / ST-Box** - firmware 2.1.5 - SSH service open, root password accepted
Goldshell **LB-Box** - firmware 2.1.1 - SSH service open, root password accepted
**Not working** on latest firmware (SSH service not open / connection refused):
Goldshell CK-Box - firmware 2.1.1 - **SSH service *not* open**
Goldshell HS-Box - firmware 2.1.2 - **SSH service *not* open**
**Unknown** (I don't have one):
Any of the bigger Goldshell miners - **not confirmed**
Goldshell KD-Box - not sure if SSH is listening on this device - **not confirmed**
**How I retrieved it** (unredacted version is available in the instantly available file):
-I downloaded the Goldshell firmware from XXX
-I unpacked the initial first stage with XXX which yielded a "XXX" file
-I then ran XXX in Linux to extract all files / images from the XXX image file
-I was able to locate XXX and XXX- in the unpacked files in the /etc directory which yielded the hashes:
XXXXXru9o
XXXXX0W4Y
-I used XXX with XXX using a XXX and XXX and was able to find the new password in my lists
Old: XXXXXu9o:XXXX746
New (Current): XXXXX0W4Y:XXXXX23
As I did this myself I know nobody else has this. I explain precisely how in the digitally delivered file, although be advised I used my own wordlists / rulesets so you can definitely verify my work but you may not be able to crack future ones if they changed it unless you have some experience with this stuff.
Everything you need for the STC-Box and LB-Box on the listed versions is in the file!
Here's a look:
I'm totally fine with doing an escrow transaction (all the better if there are mods familiar with the Goldshell miners or have a Goldshell Box home miner themselves). Thanks!
Some Goldshell Box ASICs have the SSH service open. With the root password you are able to remote into the miner and basically change anything. Here's what I've found so far:
**Working** on latest firmware:
Goldshell **STCBox / ST-Box** - firmware 2.1.5 - SSH service open, root password accepted
Goldshell **LB-Box** - firmware 2.1.1 - SSH service open, root password accepted
**Not working** on latest firmware (SSH service not open / connection refused):
Goldshell CK-Box - firmware 2.1.1 - **SSH service *not* open**
Goldshell HS-Box - firmware 2.1.2 - **SSH service *not* open**
**Unknown** (I don't have one):
Any of the bigger Goldshell miners - **not confirmed**
Goldshell KD-Box - not sure if SSH is listening on this device - **not confirmed**
**How I retrieved it** (unredacted version is available in the instantly available file):
-I downloaded the Goldshell firmware from XXX
-I unpacked the initial first stage with XXX which yielded a "XXX" file
-I then ran XXX in Linux to extract all files / images from the XXX image file
-I was able to locate XXX and XXX- in the unpacked files in the /etc directory which yielded the hashes:
XXXXXru9o
XXXXX0W4Y
-I used XXX with XXX using a XXX and XXX and was able to find the new password in my lists
Old: XXXXXu9o:XXXX746
New (Current): XXXXX0W4Y:XXXXX23
As I did this myself I know nobody else has this. I explain precisely how in the digitally delivered file, although be advised I used my own wordlists / rulesets so you can definitely verify my work but you may not be able to crack future ones if they changed it unless you have some experience with this stuff.
Everything you need for the STC-Box and LB-Box on the listed versions is in the file!
Here's a look:
I'm totally fine with doing an escrow transaction (all the better if there are mods familiar with the Goldshell miners or have a Goldshell Box home miner themselves). Thanks!