Re: [GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher

Quote from: suchmoon on March 23, 2014, 07:50:29 PM

Quote from: milkman510 on March 23, 2014, 06:29:35 PM

I'm planing my Gridseed farm setup. Can someone tell me if this will work? I want to attached 20x Gridseed to 1x RasPi. I will be using 2x Roswell (RHB-500) 10 port USB hubs. But I would also like to use a usb wifi adapter. Will the following non powered USB splitter work? Assuming I hook up the the wifi adapter and 1x 10 port usb hub to 1 USB 2.0 port on the RasPi. The other 10 port usb hub will plug directly into the 2nd usb 2.0 port on the RasPi. My alternative would be to get a wireless bridge and hook up a Ethernet hub. But my preference would be to use a mini wifi adapter.

10 Port USB Hub (Powered):
http://www.amazon.com/Rosewill-10-Port-High-Speed-RHB-500/dp/B004F38WT4/ref=sr_1_1?ie=UTF8&qid=1395598321&sr=8-1&keywords=roswell+usb+hub

3 Port USB Splitter (Non-Powered):
http://www.ebay.com/itm/Black-USB-2-0-Hi-Speed-4-Port-Splitter-Hub-For-PC-Notebook-/370896703254?pt=US_USB_Cables_Hubs_Adapters&hash=item565b2a8f16

Get a 13-port hub and a 10-port hub, and don't use the splitter. Or get two 13-port hubs, in case you want to connect a few more donuts later. The goal is to keep max 2 levels of daisy-chained hubs, and any hub with >7 ports already has 2 levels inside.

Thanks can you recommend a 13 port hub that works with Raspberry Pi?