Managed to get TBM 1.32 to run in SMOS.

Some notices. I'm currently testing TBM 1.32 with a 7 x 3060 Ti FHR. SMOS 5.10.60-sm1#021 nvidia drivers 470.74. Was running t-rex-v0.24.8 with same SMOS and Nvidia versions. With TBM I had to slightly lower my mem overclock, it was crashing all the time. Even with lower mem overclock rig restarts about 20 times per day.
Only reason I switched is the "maintenance-fee" feature. It works but it has room to grow.
My config: -d -a ethash -H eu1.ethermine.org -p 4444 -r 40 -y 20 -t 120 -W "ETH_WALLET1" -w $rigName -P x --maintenance-wallet "ETH_WALLET2" --maintenance-percent 10
(Note on config for SMOS: If you don't put "-d" you don't get any MHs status in SMOS. SMOS puts a persistent message in console telling you to put "-b" to see stats. If you put "-b" you're telling TBM to run only with AMD cards. Not cool when you only have Nvidia cards in your rig... So don't put "-b" to see stats, put "-d")

Ethermine reported hashrate in "ETH_WALLET1" is the full rig's speed not the 90% of the rig's full speed as it should (since the maintenance fee is 10%). In "ETH_WALLET2" it only reports 2,4 MHs, should be 10% of the total hashrate.
Below numbers are after 9 hours running straight without a reboot.
Reported hashrate in both SMOS and Ethermine "ETH_WALLET1" is about 433 MHs, Current is 373 MHs and Average is 306 MHs.
Reported hashrate in Ethermine "ETH_WALLET2" is 2,4MHs, Current is 35.8MHs and Average is 28.4 MHs. 
As you can see by the numbers Current and Average are way off. Even if we take that Average needs more than 9 hours online to stabilize, Current should be very close but it's not. About 24 MHs are missing. Any ideas?