hi.
my 1st times trying tbm and it's going fine with a 6800xt. some issues tho:
- can't say if my stall ratio ok: 114/0/21 ?
TBMiner --algo ethash --hostname eu1.ethermine.org --port 5555 --wallet %ETH_WALLET% --worker-name TEST1amd --xintensity -1 --templimit 66 -b -d
Remove --xintensity -1 for this pool. Ethermine doesn't pay for stale shares, so you need a low value like the default --xintensity 24 or similar. --xintensity 78 was reported to run good on the 6800XT.
The hashrate will drop, but if you want to use --xintensity -1 switch to 2miners, f2pool, miningpoolhub, nanopool or similar.
I'm currently running between 800 and 1024 on my 6800's on 2Miners and getting decent results (66-68 MH/s). The funny thing is that my fastest and most stable card is my Sapphire 6800, the 6800XTs are close and run very nearly the same hashrate in the client but their share rate at the pool is lower, and by far my worst card is the 6900XT which won't run full memory speed without crashing (same memory as the 6800XTs) and constantly drops to low power if the memory is pushed too fast, or has these annoying 1 second power downs which don't crash the miner (as opposed to those glitches that do crash the miner and the driver).
But in general, it seems that I can push the intensities on these cards without getting _any_ stale shares at the pool, and maybe 20% 'estimated' by the miner.