Exact same settings on same 7 x 3060 TI FHR with TBM v 1.32 and v 1.33. Running at -450 Core clock, 2400 Memory clock and 130W power limit.
Getting lower hashrate on 1.33, switched back to 1.32. Running SMOS with nv470.74 drivers.

-d -K 1 --dagintensity 1 --xintensity 284 -a ethash -H eu1.ethermine.org -p 4444 -r 40 -y 20 -t 120 -W "MAIN_WALLET" -w $rigName -P x --maintenance-wallet "MAINTENANCE_WALLET" --maintenance-percent 5

RIG is online >24H.

TBM 1.32 reports 437,xx MH/s.
I keep seeing wrong reported values (pool side). Reported hashrate on MAIN_WALLET is full rigs capacity not the 95% of it (as it should) and it fully correlates with what TBM is saying (437,xx MH/s). Reported hashrate on MAINTENANCE_WALLET remains 2,5 MH/s stable.
Average hashrate in MAIN_WALLET is low. It's about 380 - 384 MH/s. Average hashrate on MAINTENANCE_WALLET is between 18-22 MH/s.

So, 2 issues here.
One is the wrong reported values in MAIN and MAINTENANCE wallets respectively.
Two is the lower overall real hashrate than the reported one.

As a side note if you have any recommendations about my config they are most than welcome.
I manage a total of 10 GH/s in mixed AMD and NVIDIA rigs and I would like to switch them all in TBM as long as it is as stable and fast as other miners. My only reason for switching is the implementation of the maintenance fee since this is exactly the feature I want to get easily paid for my maintenance work.