Also, a 12x3070 NO lhr rig gives errors during dag generation, option --dagintensity 1 is always on.
Hi Guys,
Yep, i still have same problem, DAG error on No LHR 3070
I'm testing the miner on my son's gaming computer before I put it on my rigs. But DAG is failing no matter what. Same clock i use on other miners and there is no dag errors.
If your OC is stable, you can set the clock low on startup and wait for the DAG to be verified and then use nvidiaInspector to lock the clock speed. Just make sure you're also forcing the P0 state since the Memory OC values will be much higher on the other P-states and the card will crash the system if the miner stops; the card will revert to P0 for idle and the requested OC values will be much higher than the card is actually able to clock to.
I was thinking about that, but since this miner works faster, as per sp i lowered clock to 1050 and i get 62+Mhs with no additional flags in bat file. All default.
Does this mean that i could perhaps lower PL too as mem clock is 150 less?
I will test on this card for while and report back.