hey guys, new here but total respect for all your work. Please take no offense but the pics you guys submit are so blurry that its hard to tell exactly where to make mods. With the size of these resistors/solder places are so small a mistake is very easy, so knowing or seeing a clear pic of the areas where resistor jumper goes the solder bridges and pencil bridges would be awesome and maybe the numbered area next to it like
38k resistor jumper on c38 , pencil bridge on r211/r212.  The pic of the fan mod is easy enough to get just attach the + to the +5v side of the resistor or the 1st pin on the mini-usb located with a dot. Again I am sorry to ask but have 20gs to do and can't afford to screw up. Rather be completely sure of the job before I even start. Don't have a prob doing the soldiering hell i have repaired cell phones,laps and other items with micro solder places. So anyone out there with a good camera that can take very clear pics of areas will be a hero to me besides the guys who worked all this out in first place