Can't run dual mining. Ends with this error:
GPU 0: Starting DAG generation (normal mode)
GPU 0: DAG build complete 16%
GPU 0: DAG build complete 32%
Ton job with difficulty 274.88G and giver WALLET received.
GPU 0: DAG build complete 48%
GPU 0: DAG build complete 64%
GPU 0: DAG build complete 80%
New job received: 0xbcef3a Epoch: 471 Difficulty: 8.73G
Ton pool connection mode: https job polling (ton-miner compatible) (--ton-mode 1)
GPU 0: DAG build complete 96%
GPU 0: DAG generation completed (4250 ms)
GPU 0: DAG verification passed
DNS over HTTPS resolve succeeded
Для пpoдoлжeния нaжмитe любyю клaвишy . . .
Before it had some problems w/ DAG files, it had defected segments
Yes, just only use another pool like ton-pool.com or toncoinpool.io, that is the big problem, the block of cloudfare from tonwhales.com
yes, there is.
Probably --maxdualimpact *,0,0
where * mean exclude, and 0,0 mean default value
--dualdevices didn't work and it will not as stated here:
Use --dualmode TONDUAL in order to activate this mode.
The parameter --dualdevices is meaningless for this mode.
Not 100 % sure but ...
or wait for Jgonzi...
I will try it and will inform you if it worked. One thing I forgot to mention is I am using HiveOS, so I don't know if something should be different.
EDIT: I circumvented the problem by just using another miner for the first card, either way thanks for the help.
It has been uploaded a new bat file, because the mine eth ton from the zip file it doesn't read the EXTRAPARAMETERS
[moderator's note: consecutive posts merged]Using the new dag file and a different pool worked. Thanks
One more question. I have 2x 3060 v1 and the ton mining speed fluctuates wildly while the eth mining speed stays stable(46-48 mh/s) while dual mining.
At one point both the cards were getting 750 mh/s. After a while I checked again, the one card was pulling off 750 mh/s and the second was at like 100mh/s.
After restarting the first one was at like 150 and the second one was at 350. It's completely random but I can't get them back to 750mh/s each. Using 470.05 drivers.
Temps seem normal(about 65 each), and OC settings are the same for each card(+0 core clock/voltage, +1100 memory clock, 74% power limit).
Any ideas what could be the issue?