I have a question about the full units and temperature for the CPU. I recently got my 2nd full unit, and I noticed the CPU temps are quite a bit higher than on my first full unit. Temps on the first fluctuate between 55C to 60C mining on Turbo mode and running the node. For my second full unit temps were originally 85C when running both and 75C when mining only. I discovered the CPU fan was warped like the screws had been tightened too much, but it could have been from the heat. Rotated it by 90 degrees and tightened the screws just enough to remove the warping. That help and dropped temps a bit. Next, I relaced the fan, and that seemed to resolve the issue initially, but overnight temps are back to the 75C range.

Curious if anyone has suggestions on what to check next as I would prefer to have the CPU in the 55C to 60C range if possible. I have not looked yet to see how the heatsink is attached. I also have a small blower style fan that I might try to fit and position to blow over the heatsink and remove the regular 2507 fan. That would increase the airflow but not sure it would help without a shroud of some type to direct the airflow.

Maybe I just need to reach out to support?

Thoughts?

Thanks in advance!