Re: GridSeed 5-chip USB miner voltage mod

With all due respect, Wolfey... you have contributed a huge amount of information, expertise and data to this mod thread, but I see nothing gained.

I have banks of unmodified Gridseeds running on Windows 7 with the girnyau's gridseed fork of cgminer compiled for Windows by Sang with his config settings at 888MHz which are getting as good or better 24hr averages on the pool side... 350Kh/s to 360Kh/s over 40 units over 24 hours.

Okay, let's not be so hasty, eh?
I'm going to let them run overnight and see how the average looks in the morning.
Then I'll back them down to 850 clock and see how they do over another 24 hours.
That's the breaks in R&D. You win some, you lose some.
There are a few others trying these mods out too.
Let's wait and see what happens.
Wolfey2014

Wolfey,

I am probably only slightly less disappointed than yourself. So please keep pushing forward with modifications and tweaks, without people like you and the others here, we would still be running at 600MHz and 300Kh/s. So keep up the good work.

24Kilo

Thank you 24Kilo! Very nice of you to say that. Much appreciated!
I forgot to mention folks, that they were down for around 3.5 hours this afternoon due to the usual USB burp that occurs without regularity while I was out in the field doing my usual miracle work for a customer.
When I got back, I of course reset and fired them back up. Perhaps this is why the current results? I let them run another 3+ hours to make up for the glitch so I may have been a bit pre-mature in posting the results. It's not an actual straight uninterrupted 24 hour period. My bad! Sorry about that! DOH!

Hey, I'm still learning too, okay? Embarrassed

Just believe me that what ever I post on this, is based on non-altered true data!
Just the facts, jack Wink

Wolfey2014