Re: PhoenixMiner 6.0c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
⭐ Merited by vapourminer (1)
Greetings. Who can explain why, after adding 6700xt to the previously working RX478, on the air in Phoenix Miner 5.8c under Windows 10, driver 21.4.1, ping 45-70, Phoenix began pouring stales, (there are no stales on the statistics website 2MINERS.COM) I turn off 6700xt - everything is fine, there are no stales. I don't understand how a new card can do stales?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -coin eth -pool eth.2miners.com:2020 -rvram 1 -wal 15bYe_______toB4.r1 -proto 4 -cvddc 0,870,870 -mvddc 0,870,870 -cclock 0,1150,1150 -mclock 0,2090,2090 -tt 65 -fanmin 30,24,24 -hstats 2 -clKernel 0,2,2 -rxboost 1
pause
2022.03.12:13:01:21.448: main Eth: Accepted shares 555 (31 stales), rejected shares 0 (0 stales)
2022.03.12:13:01:21.448: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 5.59%
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -coin eth -pool eth.2miners.com:2020 -rvram 1 -wal 15bYe_______toB4.r1 -proto 4 -cvddc 0,870,870 -mvddc 0,870,870 -cclock 0,1150,1150 -mclock 0,2090,2090 -tt 65 -fanmin 30,24,24 -hstats 2 -clKernel 0,2,2 -rxboost 1
pause
2022.03.12:13:01:21.448: main Eth: Accepted shares 555 (31 stales), rejected shares 0 (0 stales)
2022.03.12:13:01:21.448: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 5.59%
rx 6700 xt uses best -clkernel 1 and -rxboost 1 is for polaris cards. If PhoenixMiner -list shows
rx470 as gpu1 and rx6700xt as gpu2 try this:
PhoenixMiner.exe -coin eth -pool eth.2miners.com:2020 -rvram 1 -wal 15bYe_______toB4.r1 -proto 4 -cvddc 1:0,2:870 -mvddc 1:0,2:870 -cclock 1:0,2: -mclock 1:0,2:2090 -tt 65 -fanmin 1:30 -hstats 2 -clKernel 1:0,2:1 -rxboost 1:1 -fpwm 2:4
1=rx470 2=rx6700xt
My settings for rx6600xt I use under linux are:
Phoenixminer -amd -acm -clKernel 2:1 -hwm 2 -tt 2:60 -ttmem 2:70 -hstats 2 -fpwm 2:4 -cclock 2:1100 -mclock 2:1170
I don´t set the cvddc and mvddc as the AMD driver under linux takes care of that automatically.
GPU2: 40C 0% 65W
GPU2: cclock 1100 MHz, cvddc 743 mV, mclock 1169 MHz, Tj 45C, Tmem 64C, 517 kH/J
GPUs power: 65.0 W; cost: 0.47 USD/day; 517 kH/J