As a side note or question are all of these small tp link Routers supported if so does anyone have a list of one's that would work without haveing to change the tecnobit downloads Thanks.
the reason I ask is I may have bricked this 3020 and If I can use a different model TL router that I may find locally instead of waiting a week to receive one in the Mail. Thanks.
The firmware write specifically for TL-MR3020 only. I was curious what exactly happen on your's since there is no change that the router brick after network problem.
Failsafe Mode
Set your computer's IP to 192.168.1.2, subnet 255.255.255.0
Connect the TL-MR3020 to your computer via ethernet
Power on the TL-MR3020
When the WPS button starts to blink:
on AA (Attitude Adjustment / 12.09) push the WPS button;
on BB (Breaking Barrier / trunk) move the sliding switch quickly from one side to the other.
Do this until the WPS button starts blinking faster.
The device is now in Failsafe-Mode
You may access it by using telnet 192.168.1.1
Info on resetting to OpenWrt defaults can be found at:
generic.failsafe