Hi, I have a A1246 87TH and trying to use this command for the static fan setting and it just sits on the "running command" progress bar. I also tried the Aging tab and prior, the machine ran at 75TH on normal mode, and 88TH. Now it is showing 88TH in normal mode. Thoughts?
can you send the command for autotuning of chips, my one chip is exceeding 120c mark and voltage is around 338, although miner is working good at 82th stable.
can you share the command line please,
thanks , looking forward for your reply
Try to refresh the miner's ASIC chips through the FMS tool you can download it from this link below
-
https://canaan.io/wp-content/uploads/2020/03/FMS_V2.3.3_Windows.zipAnd then look for the aging tab and select any hashboard with high ASIC chip temp.
If it still overheating manually set the fan speed to 100% to test if it can help to cool down those chips
To set the fan speed you must have the FMS tool and then go to diagnostic and put this command below
[b][{"command":"ascset","parameter":"0,fan-spd,90"}] [/b]
Fan-spd,90 it's a fan speed with 90% you can replace it with 80% or 100% to try if it fixes the issue.