Re: Bitmain AntMiner S1 180GH/S miner Setup Guide for Dummies 101
Power wise, as long as your computer's ATX or Server's power supply (PSU) supports it and the lines are +12V, you can use any of them.
Best way would be not chop up the PSU's cables but use the extenders and then cut the extended portion, so you don't scarify your PSU.
Best way would be not chop up the PSU's cables but use the extenders and then cut the extended portion, so you don't scarify your PSU.
6pin male:
http://www.frozencpu.com/products/8620/ele-361/FrozenCPU_ConnectRight_6-pin_Male_PCI-Express_Power_Connector_-_Black.html?tl=g51c385s1005
8pin male:
http://www.frozencpu.com/products/8693/ele-369/PCI-E_8-pin_Male_Power_Connector_-_Black.html?tl=g51c383s1007
Get the pins too & just crimp wires as long as you need em
http://www.frozencpu.com/products/8620/ele-361/FrozenCPU_ConnectRight_6-pin_Male_PCI-Express_Power_Connector_-_Black.html?tl=g51c385s1005
8pin male:
http://www.frozencpu.com/products/8693/ele-369/PCI-E_8-pin_Male_Power_Connector_-_Black.html?tl=g51c383s1007
Get the pins too & just crimp wires as long as you need em
Im having problems with one of my AntMiner S1s its only running at 120ghash and sometimes dipps down to 90
Both boards seem to be running . Gettig good heat readings from all chips. Both green lights are blinking away.
If anyone can help thatd be great