Here's my current settings and results:
CPU: Intel Xeon E5-2660v2
GPU Driver version: 390.144
CUDA version: 9.0, CUDA runtime: 8.0
sudo nvidia-smi -pl 158
DISPLAY=:0 nvidia-settings -a [gpu:0]/GPUGraphicsClockOffset[2]=+145
DISPLAY=:0 nvidia-settings -a [gpu:0]/GPUMemoryTransferRateOffset[2]=1850
=> 48C P2 161W / 158W
ethminer 0.18 or PhoenixMiner 5.4c
both need ethlargement (-straps 2 does nothing)
=> 36.7Mh/s
Thanks for the info!
System was installed in 2019 -- used nvidia-driver from debian repo and CUDA toolkit had to be installed from nvidia website at the time.
Already watercooled
Tried settings from : https://miningchamber.com/gpu-mining/gtx-1080-ti-mining-settings/
Core Voltage (VDD): NA
Power Limit: 130w
Core Clock (CClock): +40
Memory Clock (MClock): +1600
Result: 33 Mh/s
mind sharing your miner, settings and driver version?
CPU: Intel Xeon E5-2660v2
GPU Driver version: 390.144
CUDA version: 9.0, CUDA runtime: 8.0
sudo nvidia-smi -pl 158
DISPLAY=:0 nvidia-settings -a [gpu:0]/GPUGraphicsClockOffset[2]=+145
DISPLAY=:0 nvidia-settings -a [gpu:0]/GPUMemoryTransferRateOffset[2]=1850
=> 48C P2 161W / 158W
ethminer 0.18 or PhoenixMiner 5.4c
both need ethlargement (-straps 2 does nothing)
=> 36.7Mh/s
I would try asking around the Linux community, if you come around any tips or anything let us know.
I like this guide; https://miningchamber.com/gpu-mining/gtx-1080-ti-mining-settings/ and get a https://nzxt.com/product/kraken-g12 cooling setup followed by a shunt mod
Just kidding..
Have you done this;
$ sudo vim /etc/apt/sources.list
## For more packages add contrib non-free at the end of each line
i.e.
deb http://deb.debian.org/debian/ buster main contrib non-free
$ sudo apt purge nvidia-* && sudo apt update
$ sudo apt install nvidia-cuda-toolkit && sudo reboot
A blue screen will pop-up, read what it says, hit [ok]
I figure the current nvidia-cuda-toolkit would include the latest driver: https://salsa.debian.org/nvidia-team/nvidia-cuda-toolkit/-/commits/debian/11.2.2-3+deb11u1
I like this guide; https://miningchamber.com/gpu-mining/gtx-1080-ti-mining-settings/ and get a https://nzxt.com/product/kraken-g12 cooling setup followed by a shunt mod
Just kidding..Have you done this;
$ sudo vim /etc/apt/sources.list
## For more packages add contrib non-free at the end of each line
i.e.
deb http://deb.debian.org/debian/ buster main contrib non-free
$ sudo apt purge nvidia-* && sudo apt update
$ sudo apt install nvidia-cuda-toolkit && sudo reboot
A blue screen will pop-up, read what it says, hit [ok]
I figure the current nvidia-cuda-toolkit would include the latest driver: https://salsa.debian.org/nvidia-team/nvidia-cuda-toolkit/-/commits/debian/11.2.2-3+deb11u1
Thanks for the info!
System was installed in 2019 -- used nvidia-driver from debian repo and CUDA toolkit had to be installed from nvidia website at the time.
Already watercooled
Tried settings from : https://miningchamber.com/gpu-mining/gtx-1080-ti-mining-settings/
Core Voltage (VDD): NA
Power Limit: 130w
Core Clock (CClock): +40
Memory Clock (MClock): +1600
Result: 33 Mh/s
As of today:
mind sharing your miner, settings and driver version?
try to set mem -502, core +200/220 pl 75...