Done
did add the ntp servers, and did set custom dns to 8.8.8.8
actualy i did read his thread twice, not sure what exactly is wrong, the green lights that suppose to light while mining aren't lighting up at all
got mine to light up by switching pcie cables but it still wont mine hash rate is zero but pool info says alive? no antminer stats at all?
What sort of power supply are you using?
antec earthwatts 650, 80 plus bronze, dual 12v rails
I looked up this power supply on Antec's web site, however it doesn't specify the current on the 12V rails. I'm using the Antec TruePower TPC-650 and it works fine. Do you know what is the current spec on your PS?
In my setup the connection to the antminer is through the WAN, not the LAN. How did you setup your connection?
Are you sure that you entered your miner credentials correctly?
How is your router setup in relation to the Antminer? (as the WAN address is fixed, many routers allow a pre-allocation of an IP address to a specific mac address, you can use this feature to get your router to support a fixed IP for the Antminer. Your Router's IP address range needs to cover the Antminer's, so if you leave the Antminer WAN at the factory default 192.168.1.99 your router needs to cover for example 192.168.1.1 to 192.168.1.100, typically in this case your router (the 'gateway') would be at 192.168.1.1).
Good luck