If you are mining FLUX, you must use a different GPU CORE and MEM setting as when you mining ETH.
For FLUX mining try GPU CORE +200 MHz and MEM +0 MHz
Info: https://www.hashrate.no/3070
For FLUX mining try GPU CORE +200 MHz and MEM +0 MHz
Info: https://www.hashrate.no/3070
Oh I didn't know that ! I thought Afterburner settings worked for every situation. Thanks, now with Power limit 70%, Core +200 and Memory 0, I can reach about 60 Sol/s with 153W and 65°C with 40% fan speed !
Thank you very much for your help.
I don't know where you reside but I guess you are in some cool place compared to most of Europe,here we are experiencing the hottest days of the year so far so running at 40% fan speed is not an option,I get like 69 degree C at 76% fan speed here with while 38 degree C outside,so I advise you to increase a bit the fan speed as you know the cooler a card run the longer its lifespan while even if you happen to damage the fans (rarely has happened to me) you can always replace them for a low cost compared to replacing the card.Just an advice from a fellow miner.
https://www.aliexpress.com/item/1005003600191997.html
On my GTX 1080 graphics cards, it has been doing an excellent job of cooling for several years. You only need to pick up the right fans, from 0.35 A.