Code:
0: GSF 10051796: BM1397:01+ 575.00MHz T:575 P:575 (22:11) | 100% WU:100% | 319.2G / 303.8Gh/s WU:4245.6/m
1: GSF 10051619: BM1397:01+ 575.00MHz T:575 P:568 (22:11) | 100% WU:100% | 425.0G / 316.7Gh/s WU:4424.0/m
2: GSF 10051622: BM1397:01+ 200.00MHz T:405 P:0 (64:32) | 100% WU:100% | 35.13G / 141.9Gh/s WU:1981.7/m
1: GSF 10051619: BM1397:01+ 575.00MHz T:575 P:568 (22:11) | 100% WU:100% | 425.0G / 316.7Gh/s WU:4424.0/m
2: GSF 10051622: BM1397:01+ 200.00MHz T:405 P:0 (64:32) | 100% WU:100% | 35.13G / 141.9Gh/s WU:1981.7/m
i can't get my third compac f miner to run for any length of time at the same mhz as the other two
wanted to set all 3 miners to 575mhz now - the first two went step by step to 575 with no problems and the third stopped at 405mhz and then went back to 200mhz... now he tries again to go to 575mhz
what could be the cause of the whole problem?
my compac f including fan are connected to the gekko usb hub as follows:
Code:
0:GSF: port 7 (compac f) <-> port 6 (fan)
1:GSF: port 4 (compac f) <-> port 3 (fan)
2:GSF: port 5 (compac f) <-> port 2 (fan)
1:GSF: port 4 (compac f) <-> port 3 (fan)
2:GSF: port 5 (compac f) <-> port 2 (fan)