Ok Albert, first your config is for nitro.org pool but you are looking on nitro2.org pool. for results. Completely different pools.
First shut your rig down, by that I mean kill the power completely and wait a bit before restarting. The drivers need a reset.
Is your dual bios switch on the card on (lit up blue) or off (no light). The blue light needs to be on for those config settings to work. Also add some parameters for that card. --gpu-engine 1040, --gpu-memclock 1250 is enough. Also set a --gpu-temp about 72. If this does not get you hashing near 100kh/s then add look up gap 3 and should give you about 70kh/s