I have 2 RM750's powering 3 overclocked S1's.
Total wattage +-1100W from the wall and 4.8A
Total wattage +-1100W from the wall and 4.8A
Hi,
I'm curious how you did this setup? I want to do something similar. I know you have to apply primary power to the control board side of each of the ants.
I plugged each PSU to an ant with double PCIE cables (which you use for your graphics cards).
Then I had an adapter that went from 2x molex to 1x 6pin and use one on each PSU.
In total of 1100W, each PSU is pulling 550-600W.
