Just got s19j pro and reviewing the log.... i seen bad sector, so im trying to see if they sent corrupted something... If anyone could take a look would be greatly appreciated......
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Jun 9 13:22:51 CST 2022
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc:
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 211704K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29960K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008251@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016903@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036436@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068603@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106463@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114388@0] SELinux: Starting in permissive mode
[ 0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128831@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186196@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187006@0] CPU0: update cpu_capacity 1024
[ 0.191333@0] ASID allocator initialised with 32768 entries
[ 0.229467@0] secmon: can't fine clear_range
[ 0.229672@0] EFI services will not be available.
[ 0.232937@0] Meson chip version = RevC (25:C - 23:0)
[ 0.266601@1] Detected VIPT I-cache on CPU1
[ 0.266661@1] CPU1: update cpu_capacity 1024
[ 0.266663@1] CPU1: Booted secondary processor [410fd034]
[ 0.294665@2] Detected VIPT I-cache on CPU2
[ 0.294718@2] CPU2: update cpu_capacity 1024
[ 0.294720@2] CPU2: Booted secondary processor [410fd034]
[ 0.322731@3] Detected VIPT I-cache on CPU3
[ 0.322781@3] CPU3: update cpu_capacity 1024
[ 0.322784@3] CPU3: Booted secondary processor [410fd034]
[ 0.322872@0] Brought up 4 CPUs
[ 0.362092@0] SMP: Total of 4 processors activated.
[ 0.367001@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373037@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.383593@0] CPU: All CPU(s) started at EL2
[ 0.384776@0] alternatives: patching kernel code
[ 0.390083@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397300@0] devtmpfs: initialized
[ 0.412306@0] DMI not present or invalid.
[ 0.412716@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.420670@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427245@0] pinctrl core: initialized pinctrl subsystem
[ 0.433629@0] NET: Registered protocol family 16
[ 0.457197@0] cpuidle: using governor menu
[ 0.457678@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463306@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.470716@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.476867@0] clkmsr: clkmsr: driver init
[ 0.480915@0] aml_watch_point_probe, in, wp:2
[ 0.485491@0] pstore: using zlib compression
[ 0.489746@0] console [pstore-1] enabled
[ 0.493186@0] pstore: Registered ramoops as persistent store backend
[ 0.499592@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.513935@0] aml_iomap: amlogic iomap probe done
[ 0.520853@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.522788@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.611043@0] usbcore: registered new interface driver usbfs
[ 0.611206@0] usbcore: registered new interface driver hub
[ 0.616817@0] usbcore: registered new device driver usb
[ 0.622149@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.627045@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.636451@0] PTP clock support registered
[ 0.640777@0] dmi: Firmware registration failed.
[ 0.649588@0] secmon: reserve_mem_size:0x300000
[ 0.649760@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.656726@0] secmon: get page:ffffffbf00140000, 5000
[ 0.661417@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.669809@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.677691@0] NetLabel: Initializing
[ 0.679859@0] NetLabel: domain hash size = 128
[ 0.684447@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.689676@0] NetLabel: unlabeled traffic allowed by default
[ 0.696279@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.823105@0] VFS: Disk quotas dquot_6.6.0
[ 0.823252@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.849165@3] NET: Registered protocol family 2
[ 0.850221@3] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.855443@3] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.862099@3] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.868669@3] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.874631@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.881371@3] NET: Registered protocol family 1
[ 0.886320@3] RPC: Registered named UNIX socket transport module.
[ 0.891756@3] RPC: Registered udp transport module.
[ 0.896640@3] RPC: Registered tcp transport module.
[ 0.901538@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.910700@3] Unpacking initramfs...
[ 1.409268@3] Initramfs unpacking failed: junk in compressed archive
[ 1.416033@1] Freeing initrd memory: 6556K
[ 1.416977@1] hw perfevents: clusterb_enabled = 0
[ 1.419218@1] hw perfevents: cpumasks 0xf, 0x0
[ 1.423774@1] hw perfevents: cluster A irq = 7
[ 1.428329@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.438408@1] audit: initializing netlink subsys (disabled)
[ 1.441854@1] audit: type=2000 audit(1.256:1): initialized
[ 1.449133@1] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.472982@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.479901@1] NFS: Registering the id_resolver key type
[ 1.479982@1] Key type id_resolver registered
[ 1.483919@1] Key type id_legacy registered
[ 1.488531@1] fuse init (API version 7.26)
[ 1.493853@1] SELinux: Registering netfilter hooks
[ 1.500237@1] NET: Registered protocol family 38
[ 1.500341@1] Key type asymmetric registered
[ 1.503511@1] Asymmetric key parser 'x509' registered
[ 1.509030@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.516239@1] io scheduler noop registered (default)
[ 1.521306@1] io scheduler deadline registered
[ 1.526018@1] io scheduler cfq registered
[ 1.547282@1] Unable to detect cache hierarchy for CPU 0
[ 1.547529@1] random: fast init done
[ 1.551382@3] random: crng init done
[ 1.585496@1] loop: module loaded
[ 1.586954@1] zram: Added device: zram0
[ 1.587376@1] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.594183@1] libphy: Fixed MDIO Bus: probed
[ 1.598851@1] tun: Universal TUN/TAP device driver, 1.6
[ 1.603257@1] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.611454@1] ee eth reset:Addr = ffffff80081fd008
[ 1.618954@1] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.620919@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.626154@1] Ring mode enabled
[ 1.629384@1] DMA HW capability register supported
[ 1.634109@1] Normal descriptors
[ 1.637432@1] RX Checksum Offload Engine supported
[ 1.642334@1] COE Type 2
[ 1.644957@1] TX Checksum insertion supported
[ 1.649419@1] Wake-Up On Lan supported
[ 1.653361@1] Enable RX Mitigation via HW Watchdog Timer
[ 1.672129@1] libphy: stmmac: probed
[ 1.672181@1] eth%d: PHY ID 00000128 at 0 IRQ POLL (stmmac-0:00) active
[ 1.676750@1] eth%d: PHY ID 00000128 at 3 IRQ POLL (stmmac-0:03)
[ 1.684779@1] PPP generic driver version 2.4.2
[ 1.687619@1] PPP BSD Compression module registered
[ 1.692156@1] PPP Deflate Compression module registered
[ 1.697414@1] PPP MPPE Compression module registered
[ 1.702371@1] NET: Registered protocol family 24
[ 1.707826@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.713769@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.720845@1] usbcore: registered new interface driver cdc_acm
[ 1.726023@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.734446@1] usbcore: registered new interface driver usbserial
[ 1.741117@0] mousedev: PS/2 mouse device common for all mice
[ 1.746557@0] usbcore: registered new interface driver xpad
[ 1.751957@1] i2c /dev entries driver
[ 1.756799@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.760973@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.771841@1] ff803000.serial: clock gate not found
[ 1.773548@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.780707@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.795629@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.798338@1] console [ttyS0] enabled
[ 1.805557@1] bootconsole [aml_uart0] disabled
[ 1.815194@3] ff804000.serial: clock gate not found
[ 1.819328@3] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.826459@3] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.836857@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.842946@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.853189@1] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.859428@1] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.870345@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.879682@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.886161@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.901220@3] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.904996@3] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.917328@3] aml_dma ff63e000.aml_dma: Aml dma
[ 1.920516@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.925496@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.931829@3] efusekeynum: 4
[ 1.934214@3] efusekeyname: mac offset: 0 size: 6
[ 1.940616@3] efusekeyname: mac_bt offset: 6 size: 6
[ 1.947012@3] efusekeyname: mac_wifi offset: 12 size: 6
[ 1.953422@3] efusekeyname: usid offset: 18 size: 16
[ 1.960294@2] efuse efuse: probe OK!
[ 1.965690@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.973062@2] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.978030@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.983238@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.028425@2] meson-mmc: meson_mmc_probe() : success!
[ 2.028687@2] amlogic mtd driver init
[ 2.032749@2] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.037497@2] bl mode descrete
[ 2.040375@2] fip_copies 4
[ 2.043039@2] fip_size 0x200000
[ 2.046179@2] nand_clk_ctrl 0xffe07000
[ 2.049902@2] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.055570@2] nand_clk_ctrl 0xffe07000
[ 2.059291@2] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.068022@2] plat->aml_nand_device ffffff800a005c10
[ 2.072212@2] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.078264@2] NAND device id: 98 da 90 15 76 16
[ 2.082499@2] NAND device: Manufacturer ID:
[ 2.086565@2] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.094161@2] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.099562@2] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.105111@2] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.111356@2] mtd->oobavail: 0x8
[ 2.114751@2] aml_nand_init 2119: plat-name:bootloader
[ 2.119674@2] Creating 1 MTD partitions on "bootloader":
[ 2.124963@2] 0x000000000000-0x000000200000 : "bootloader"
[ 2.133772@3] bootloader initialized ok
[ 2.134222@3] plat->aml_nand_device ffffff800a005c10
[ 2.139204@3] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.145342@3] NAND device id: 98 da 90 15 76 16
[ 2.149507@3] NAND device: Manufacturer ID:
[ 2.153562@3] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.161134@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.166567@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.172107@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.178352@3] mtd->oobavail: 0x8
[ 2.181825@3] aml_nand_init 2119: plat-name:nandnormal
[ 2.186705@3] bbt_start=20
[ 2.189350@3] env_start=24
[ 2.192016@3] key_start=32
[ 2.194730@3] dtb_start=40
[ 2.197407@3] ddr_start=44
[ 2.200080@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.206616@3] get_free_node 43: bitmap=0
[ 2.210064@3] get_free_node 55: bitmap=1
[ 2.214169@3] get_free_node 43: bitmap=1
[ 2.217862@3] get_free_node 55: bitmap=3
[ 2.221966@3] get_free_node 43: bitmap=3
[ 2.225662@3] get_free_node 55: bitmap=7
[ 2.229563@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.236233@3] nbbt free list:
[ 2.239180@3] blockN=21, ec=-1, dirty_flag=0
[ 2.243427@3] blockN=22, ec=-1, dirty_flag=0
[ 2.247674@3] blockN=23, ec=-1, dirty_flag=0
[ 2.251922@3] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.257357@3] nbbt valid addr: 280000
[ 2.260590@3] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.266223@3] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.272497@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.278937@3] get_free_node 43: bitmap=7
[ 2.282429@3] get_free_node 55: bitmap=f
[ 2.286533@3] get_free_node 43: bitmap=f
[ 2.290229@3] get_free_node 55: bitmap=1f
[ 2.294420@3] get_free_node 43: bitmap=1f
[ 2.298203@3] get_free_node 55: bitmap=3f
[ 2.302394@3] get_free_node 43: bitmap=3f
[ 2.306175@3] get_free_node 55: bitmap=7f
[ 2.310367@3] get_free_node 43: bitmap=7f
[ 2.314149@3] get_free_node 55: bitmap=ff
[ 2.318340@3] get_free_node 43: bitmap=ff
[ 2.322122@3] get_free_node 55: bitmap=1ff
[ 2.326401@3] get_free_node 43: bitmap=1ff
[ 2.330269@3] get_free_node 55: bitmap=3ff
[ 2.334342@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.341013@3] nenv free list:
[ 2.343944@3] blockN=25, ec=-1, dirty_flag=0
[ 2.348207@3] blockN=26, ec=-1, dirty_flag=0
[ 2.352454@3] blockN=27, ec=-1, dirty_flag=0
[ 2.356700@3] blockN=28, ec=-1, dirty_flag=0
[ 2.360947@3] blockN=29, ec=-1, dirty_flag=0
[ 2.365193@3] blockN=30, ec=-1, dirty_flag=0
[ 2.369440@3] blockN=31, ec=-1, dirty_flag=0
[ 2.373687@3] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.391775@3] nenv valid addr: 310000
[ 2.391808@3] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.396185@3] get_free_node 43: bitmap=3ff
[ 2.400053@3] get_free_node 55: bitmap=7ff
[ 2.404332@3] get_free_node 43: bitmap=7ff
[ 2.408181@3] get_free_node 55: bitmap=fff
[ 2.412486@3] get_free_node 43: bitmap=fff
[ 2.416346@3] get_free_node 55: bitmap=1fff
[ 2.420711@3] get_free_node 43: bitmap=1fff
[ 2.424666@3] get_free_node 55: bitmap=3fff
[ 2.429031@3] get_free_node 43: bitmap=3fff
[ 2.432987@3] get_free_node 55: bitmap=7fff
[ 2.437351@3] get_free_node 43: bitmap=7fff
[ 2.441306@3] get_free_node 55: bitmap=ffff
[ 2.445671@3] get_free_node 43: bitmap=ffff
[ 2.449634@3] get_free_node 55: bitmap=1ffff
[ 2.454079@3] get_free_node 43: bitmap=1ffff
[ 2.458120@3] get_free_node 55: bitmap=3ffff
[ 2.462366@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.469037@3] nkey free list:
[ 2.471967@3] blockN=32, ec=-1, dirty_flag=0
[ 2.476231@3] blockN=33, ec=-1, dirty_flag=0
[ 2.480478@3] blockN=34, ec=-1, dirty_flag=0
[ 2.484724@3] blockN=35, ec=-1, dirty_flag=0
[ 2.488971@3] blockN=36, ec=-1, dirty_flag=0
[ 2.493217@3] blockN=37, ec=-1, dirty_flag=0
[ 2.497464@3] blockN=38, ec=-1, dirty_flag=0
[ 2.501711@3] blockN=39, ec=-1, dirty_flag=0
[ 2.505958@3] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.511071@3] nkey valid addr: fffffffffffe0000
[ 2.515579@3] aml_nand_key_check 1251 NO key exist
[ 2.520346@3] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.526994@3] get_free_node 43: bitmap=3ffff
[ 2.530833@3] get_free_node 55: bitmap=7ffff
[ 2.535284@3] get_free_node 43: bitmap=7ffff
[ 2.539326@3] get_free_node 55: bitmap=fffff
[ 2.543778@3] get_free_node 43: bitmap=fffff
[ 2.547820@3] get_free_node 55: bitmap=1fffff
[ 2.552153@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.558823@3] ndtb free list:
[ 2.561771@3] blockN=41, ec=-1, dirty_flag=0
[ 2.566017@3] blockN=42, ec=-1, dirty_flag=0
[ 2.570264@3] blockN=43, ec=-1, dirty_flag=0
[ 2.574511@3] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.592619@3] ndtb valid addr: 500000
[ 2.592653@3] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.597112@3] get_free_node 43: bitmap=1fffff
[ 2.601241@3] get_free_node 55: bitmap=3fffff
[ 2.605778@3] get_free_node 43: bitmap=3fffff
[ 2.609907@3] get_free_node 55: bitmap=7fffff
[ 2.614241@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.620911@3] nddr free list:
[ 2.623842@3] blockN=44, ec=-1, dirty_flag=0
[ 2.628105@3] blockN=45, ec=-1, dirty_flag=0
[ 2.632352@3] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.637465@3] nddr valid addr: fffffffffffe0000
[ 2.641972@3] aml_nand_ddr_check 1281 NO ddr exist
[ 2.646742@3] tpl: off 8388608, size 8388608
[ 2.744499@3] NAND bbt detect factory Bad block at c000000
[ 2.744551@3] aml_nand_add_partition:394 factory bad addr=600
[ 2.750235@3] NAND bbt detect factory Bad block at c020000
[ 2.755745@3] aml_nand_add_partition:394 factory bad addr=601
[ 2.795383@3] Creating 6 MTD partitions on "nandnormal":
[ 2.795430@3] 0x000000800000-0x000001000000 : "tpl"
[ 2.806798@1] 0x000001000000-0x000001200000 : "misc"
[ 2.810552@0] 0x000001200000-0x000002200000 : "recovery"
[ 2.822083@1] 0x000002200000-0x000004200000 : "boot"
[ 2.841565@1] 0x000004200000-0x000004700000 : "config"
[ 2.846215@1] 0x000004700000-0x000010000000 : "nvdata"
[ 2.910844@1] NAND bbt detect factory Bad block at c000000
[ 2.910962@1] NAND bbt detect factory Bad block at c020000
[ 2.952816@3] nandnormal initialized ok
[ 2.952924@3] aml_ubootenv_init: register env chardev
[ 2.956473@3] aml_ubootenv_init: register env chardev OK
[ 2.961500@3] amlnf_dtb_init: register dtb cdev
[ 2.966371@3] amlnf_dtb_init: register dtd cdev OK
[ 2.970670@3] mtd_nand_probe 267 , err = 0
[ 2.975782@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.981285@2] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 2.988209@0] unifykey: storage in base: 0xffffffc005000000
[ 2.992869@0] unifykey: storage out base: 0xffffffc005040000
[ 2.998463@0] unifykey: storage block base: 0xffffffc005080000
[ 3.004364@0] unifykey: probe done!
[ 3.008485@0] unifykey: no efuse-version set, use default value: -1
[ 3.013991@0] unifykey: key unify config unifykey-num is 6
[ 3.019512@0] unifykey: key unify fact unifykey-num is 6
[ 3.024718@0] unifykey: unifykey_devno: f200000
[ 3.029688@2] unifykey: device unifykeys created ok
[ 3.034215@2] unifykey: aml_unifykeys_init done!
[ 3.039097@2] sysled: module init
[ 3.042568@2] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.047366@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.054727@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.063393@0] dmc_monitor_probe
[ 3.065217@0] defendkey defendkey: Reserved memory is not enough!
[ 3.070084@0] defendkey: probe of defendkey failed with error -22
[ 3.076431@0] GACT probability NOT on
[ 3.079743@0] Mirror/redirect action on
[ 3.083585@0] u32 classifier
[ 3.086416@0] Actions configured
[ 3.089975@0] Netfilter messages via NETLINK v0.30.
[ 3.095261@0] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.101504@0] ctnetlink v0.93: registering with nfnetlink.
[ 3.107295@0] xt_time: kernel timezone is -0000
[ 3.111044@0] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.117677@0] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.122385@0] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.127848@0] Initializing XFRM netlink socket
[ 3.133393@0] NET: Registered protocol family 10
[ 3.139322@0] mip6: Mobile IPv6
[ 3.139923@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.145911@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.153913@0] NET: Registered protocol family 17
[ 3.156129@0] NET: Registered protocol family 15
[ 3.160782@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.173919@0] l2tp_core: L2TP core driver, V2.0
[ 3.178304@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.183232@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.188987@0] l2tp_netlink: L2TP netlink interface
[ 3.193803@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.199846@0] l2tp_debugfs: L2TP debugfs support
[ 3.204388@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.211023@0] NET: Registered protocol family 35
[ 3.215955@0] Key type dns_resolver registered
[ 3.220542@0] Registered swp emulation handler
[ 3.224413@0] Registered cp15_barrier emulation handler
[ 3.229605@0] Registered setend emulation handler
[ 3.234346@0] disable EAS feature
[ 3.238889@2] registered taskstats version 1
[ 3.255521@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.762030@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.762122@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.770461@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.778854@0] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.786290@3] hub 1-0:1.0: USB hub found
[ 3.788794@3] hub 1-0:1.0: 1 port detected
[ 3.793388@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.798417@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.806315@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.815788@0] hub 2-0:1.0: USB hub found
[ 3.818425@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.825699@0] usb usb2: Unsupported the hub
[ 3.830443@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[ 3.838535@0] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d15f000)
[ 3.838611@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.846495@0] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.846507@0] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00bbf8a00
[ 3.946919@0] dwc_otg: Core Release: 3.10a
[ 3.946973@0] dwc_otg: Setting default values for core params
[ 3.951155@0] dwc_otg: curmode: 0, host_only: 0
[ 3.955662@0] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.968172@0] dwc_otg: Using Buffer DMA mode
[ 3.968209@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.972116@0] dwc_otg: Working on port type = SLAVE
[ 3.976974@0] dwc_otg: Dedicated Tx FIFOs mode
[ 3.983896@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 3.990691@0] cpucore_cooling_register, max_cpu_core_num:4
[ 4.003288@0] gxbb_pm: enter meson_pm_probe!
[ 4.003345@0] no vddio3v3_en pin
[ 4.005041@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.010103@0] gxbb_pm: meson_pm_probe done
[ 4.015014@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.021389@0] Freeing unused kernel memory: 3648K
[ 4.035846@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.289046@2] ubi0: attaching mtd5
[ 4.308658@2] ubi0: scanning is finished
[ 4.313556@0] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.313687@0] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.320752@0] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.327653@0] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.334766@0] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.340824@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.348203@0] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1172515841
[ 4.357467@0] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.366687@2] ubi0: background thread "ubi_bgt0d" started, PID 1079
[ 4.379762@1] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1083
[ 4.398075@0] UBIFS (ubi0:0): recovery needed
[ 4.440669@0] UBIFS (ubi0:0): recovery completed
[ 4.440943@0] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.447675@0] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.457717@0] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.467938@0] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.474528@0] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID B3B8540F-3ECE-4FAE-8DFF-C35E78647880, small LPT model
[ 4.499040@0] ubi2: attaching mtd6
[ 4.964423@0] NAND bbt detect factory Bad block at c000000
[ 4.964548@0] NAND bbt detect factory Bad block at c020000
[ 5.215375@0] ubi2: scanning is finished
[ 5.222710@3] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.223011@3] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.230117@3] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.236989@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.244082@3] ubi2: good PEBs: 1478, bad PEBs: 2, corrupted PEBs: 0
[ 5.250329@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.257689@3] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2367911377
[ 5.266968@3] ubi2: available PEBs: 0, total reserved PEBs: 1478, PEBs reserved for bad PEB handling: 2
[ 5.276349@0] ubi2: background thread "ubi_bgt2d" started, PID 1091
[ 5.289349@2] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1095
[ 5.307600@3] UBIFS (ubi2:0): recovery needed
[ 5.369338@0] UBIFS (ubi2:0): recovery completed
[ 5.369636@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"
[ 5.376369@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.386385@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.397213@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.404059@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID B38D9A02-3790-43E9-A082-EADB9E821788, small LPT model
[ 5.617046@3] eth0: device MAC address 02:ea:bd:50:1d:59
[ 5.702395@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.703789@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.915808@3] uart_trans: loading out-of-tree module taints kernel.
[ 5.918132@3] register uart_trans chrdev success.
[ 5.921618@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.929168@3] tty port open success [/dev/ttyS3]!
[ 5.934025@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.942234@3] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.948382@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.956018@3] tty port open success [/dev/ttyS2]!
[ 5.960686@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.969093@3] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.975180@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.982875@3] tty port open success [/dev/ttyS1]!
[ 5.987548@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.995955@3] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 6.002297@0] create workqueue success!
[ 7.736503@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 7.739615@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.493575@2] uart trans dev open.
[ 24.493697@2] uart_buf virt addr = 0xffffffc00b140000
[ 24.496439@2] uart_buf phys addr = 0x0b140000
[ 24.500747@2] uart_buf pfn = 0x0000b140
[ 24.505372@2] uart trans stop send work timer.
[ 24.509704@2] uart trans set chain exist bits:0x7.
[ 24.514265@2] uart trans set work queue count 768.
[ 118.111850@0] uart set baud to: 4098
[ 118.111909@0] uart set baud to: 4098
[ 118.113449@0] uart set baud to: 4098
[ 134.413248@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000
[ 134.416381@2] uart set baud to: 4109
[ 134.480370@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000
[ 134.483456@2] uart set baud to: 4109
[ 134.547669@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000
[ 134.550782@1] uart set baud to: 4109
[ 190.920185@2] uart trans start send work timer.
===========================================Miner log===========================================
2015-01-01 00:00:15 Open miner sn file /config/sn error
2015-01-01 00:00:15 Miner compile time: Thu Jun 9 13:06:22 CST 2022 type: Antminer BHB42XXX sn :
2015-01-01 00:00:16 This is fix-freq version
2015-01-01 00:00:16 Miner compile time: Thu Jun 9 13:06:22 CST 2022 type: Antminer BHB42XXX
2015-01-01 00:00:16 commit version: ffd674e 2022-06-09 10:18:00, build by: jenkins 2022-06-09 13:16:42
2015-01-01 00:00:16 opt_multi_version = 1
2015-01-01 00:00:16 opt_bitmain_ab = 1
2015-01-01 00:00:16 mid_auto_gen = 1
2015-01-01 00:00:16 opt_bitmain_work_mode = 0
2015-01-01 00:00:16 port 439 already exported
2015-01-01 00:00:16 port 454 already exported
2015-01-01 00:00:16 port 440 already exported
2015-01-01 00:00:16 port 455 already exported
2015-01-01 00:00:16 port 441 already exported
2015-01-01 00:00:16 port 456 already exported
2015-01-01 00:00:16 port 438 already exported
2015-01-01 00:00:16 port 453 already exported
2015-01-01 00:00:16 port 446 already exported
2015-01-01 00:00:16 port 445 already exported
2015-01-01 00:00:16 Note: front fan is power on!
2015-01-01 00:00:16 Note: rear fan is power on!
2015-01-01 00:00:16 start the http log.
2015-01-01 00:00:16 httpListenThread start ret=0
2015-01-01 00:00:16 start listen on 6060 ...
2015-01-01 00:00:16 bad chain id = 3
2015-01-01 00:00:19 bad chain id = 3
2015-01-01 00:00:21 ==========================capability start==========================
2015-01-01 00:00:21 board num = 3
2015-01-01 00:00:21 board id = 0, chain num = 1
2015-01-01 00:00:21 chain id = 0
2015-01-01 00:00:21 board id = 1, chain num = 1
2015-01-01 00:00:21 chain id = 1
2015-01-01 00:00:21 board id = 2, chain num = 1
2015-01-01 00:00:21 chain id = 2
2015-01-01 00:00:21 ==========================capability end============================
2015-01-01 00:00:21 chain num = 3
2015-01-01 00:00:21 skip loading levels for now
2015-01-01 00:00:22 load chain 0 eeprom data
2022-10-26 22:22:47 load chain 1 eeprom data
2022-10-26 22:22:48 load chain 2 eeprom data
2022-10-26 22:22:48 i2c_sim_init start
2022-10-26 22:22:48 init gpio477
2022-10-26 22:22:48 init gpio476
2022-10-26 22:22:48 i2c_sim_init end
2022-10-26 22:22:49 power open power_version = 0x75
2022-10-26 22:22:52 power is not Calibrated
2022-10-26 22:22:53 miner type: Antminer S19 Pro
2022-10-26 22:22:53 multi machine mode
2022-10-26 22:22:53 load machine BHB42651 conf
2022-10-26 22:22:53 machine : BHB42651
2022-10-26 22:22:53 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2022-10-26 22:22:53 fan_eft : 0 fan_pwm : 100
2022-10-26 22:22:53 create thread get_nonce_and_register_thread
2022-10-26 22:22:53 fixed working voltage = 1360
2022-10-26 22:22:53 min freq in eeprom = 525
2022-10-26 22:22:53 fixed frequency is 525
2022-10-26 22:22:53 Chain
2022-10-26 22:22:53 Chain
2022-10-26 22:22:53 Chain [1] PCB Version: 0x0120
2022-10-26 22:22:53 Chain [1] BOM Version: 0x0020
2022-10-26 22:22:53 Chain [2] PCB Version: 0x0120
2022-10-26 22:22:53 Chain [2] BOM Version: 0x0020
2022-10-26 22:22:53 bad chain id = 3
2022-10-26 22:22:53 Fan check passed.
2022-10-26 22:22:53 uart_trans addr:0xf712f000.
2022-10-26 22:22:53 max sensor num = 4
2022-10-26 22:22:53 STATUS_INITED: soc init done!
2022-10-26 22:22:53 temperature_monitor_thread start...
2022-10-26 22:22:56 start to init...
2022-10-26 22:22:57 power type version: 0x0075
2022-10-26 22:22:58 disable power watchdog: 0x0000
2022-10-26 22:22:59 Enter sleep to make sure power release finish.
2022-10-26 22:24:13 Slept 73 seconds, diff = 5.
2022-10-26 22:24:17 set_voltage_by_steps to 1500.
2022-10-26 22:24:27 start up min temp by 75a = 37
2022-10-26 22:24:30 Chain[0]: find 126 asic, times 0
2022-10-26 22:24:32 Chain[1]: find 126 asic, times 0
2022-10-26 22:24:34 Chain[2]: find 126 asic, times 0
2022-10-26 22:24:39 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2022-10-26 22:24:43 Bring up temperature is 38
2022-10-26 22:24:43 set UART baud to 3000000
2022-10-26 22:24:43 create thread check_miner_status_thread
2022-10-26 22:24:43 create thread check_system_work_thread
2022-10-26 22:24:43 set_voltage_by_steps to 1450.
2022-10-26 22:24:45 fixed step freq_start = 50, freq_end = 525, freq_step = 6.25
2022-10-26 22:24:45 chain = 0 set freq to 56.25
2022-10-26 22:24:45 chain = 1 set freq to 56.25
2022-10-26 22:24:45 chain = 2 set freq to 56.25
2022-10-26 22:24:46 chain = 0 set freq to 62.50
2022-10-26 22:24:46 chain = 1 set freq to 62.50
2022-10-26 22:24:46 chain = 2 set freq to 62.50
2022-10-26 22:24:46 chain = 0 set freq to 68.75
2022-10-26 22:24:46 chain = 1 set freq to 68.75
2022-10-26 22:24:46 chain = 2 set freq to 68.75
2022-10-26 22:24:46 chain = 0 set freq to 75.00
2022-10-26 22:24:46 chain = 1 set freq to 75.00
2022-10-26 22:24:46 chain = 2 set freq to 75.00
2022-10-26 22:24:47 chain = 0 set freq to 81.25
2022-10-26 22:24:47 chain = 1 set freq to 81.25
2022-10-26 22:24:47 chain = 2 set freq to 81.25
2022-10-26 22:24:47 chain = 0 set freq to 87.50
2022-10-26 22:24:47 chain = 1 set freq to 87.50
2022-10-26 22:24:47 chain = 2 set freq to 87.50
2022-10-26 22:24:47 chain = 0 set freq to 93.75
2022-10-26 22:24:47 chain = 1 set freq to 93.75
2022-10-26 22:24:47 chain = 2 set freq to 93.75
2022-10-26 22:24:48 chain = 0 set freq to 100.00
2022-10-26 22:24:48 chain = 1 set freq to 100.00
2022-10-26 22:24:48 chain = 2 set freq to 100.00
2022-10-26 22:24:48 chain = 0 set freq to 106.25
2022-10-26 22:24:48 chain = 1 set freq to 106.25
2022-10-26 22:24:48 chain = 2 set freq to 106.25
2022-10-26 22:24:48 chain = 0 set freq to 112.50
2022-10-26 22:24:48 chain = 1 set freq to 112.50
2022-10-26 22:24:48 chain = 2 set freq to 112.50
2022-10-26 22:24:48 chain = 0 set freq to 118.75
2022-10-26 22:24:48 chain = 1 set freq to 118.75
2022-10-26 22:24:48 chain = 2 set freq to 118.75
2022-10-26 22:24:49 chain = 0 set freq to 125.00
2022-10-26 22:24:49 chain = 1 set freq to 125.00
2022-10-26 22:24:49 chain = 2 set freq to 125.00
2022-10-26 22:24:49 chain = 0 set freq to 131.25
2022-10-26 22:24:49 chain = 1 set freq to 131.25
2022-10-26 22:24:49 chain = 2 set freq to 131.25
2022-10-26 22:24:49 chain = 0 set freq to 137.50
2022-10-26 22:24:49 chain = 1 set freq to 137.50
2022-10-26 22:24:49 chain = 2 set freq to 137.50
2022-10-26 22:24:50 chain = 0 set freq to 143.75
2022-10-26 22:24:50 chain = 1 set freq to 143.75
2022-10-26 22:24:50 chain = 2 set freq to 143.75
2022-10-26 22:24:50 chain = 0 set freq to 150.00
2022-10-26 22:24:50 chain = 1 set freq to 150.00
2022-10-26 22:24:50 chain = 2 set freq to 150.00
2022-10-26 22:24:50 chain = 0 set freq to 156.25
2022-10-26 22:24:50 chain = 1 set freq to 156.25
2022-10-26 22:24:50 chain = 2 set freq to 156.25
2022-10-26 22:24:51 chain = 0 set freq to 162.50
2022-10-26 22:24:51 chain = 1 set freq to 162.50
2022-10-26 22:24:51 chain = 2 set freq to 162.50
2022-10-26 22:24:51 chain = 0 set freq to 168.75
2022-10-26 22:24:51 chain = 1 set freq to 168.75
2022-10-26 22:24:51 chain = 2 set freq to 168.75
2022-10-26 22:24:51 chain = 0 set freq to 175.00
2022-10-26 22:24:51 chain = 1 set freq to 175.00
2022-10-26 22:24:51 chain = 2 set freq to 175.00
2022-10-26 22:24:51 chain = 0 set freq to 181.25
2022-10-26 22:24:51 chain = 1 set freq to 181.25
2022-10-26 22:24:51 chain = 2 set freq to 181.25
2022-10-26 22:24:52 chain = 0 set freq to 187.50
2022-10-26 22:24:52 chain = 1 set freq to 187.50
2022-10-26 22:24:52 chain = 2 set freq to 187.50
2022-10-26 22:24:52 chain = 0 set freq to 193.75
2022-10-26 22:24:52 chain = 1 set freq to 193.75
2022-10-26 22:24:52 chain = 2 set freq to 193.75
2022-10-26 22:24:52 chain = 0 set freq to 200.00
2022-10-26 22:24:52 chain = 1 set freq to 200.00
2022-10-26 22:24:52 chain = 2 set freq to 200.00
2022-10-26 22:24:53 chain = 0 set freq to 206.25
2022-10-26 22:24:53 chain = 1 set freq to 206.25
2022-10-26 22:24:53 chain = 2 set freq to 206.25
2022-10-26 22:24:53 chain = 0 set freq to 212.50
2022-10-26 22:24:53 chain = 1 set freq to 212.50
2022-10-26 22:24:53 chain = 2 set freq to 212.50
2022-10-26 22:24:53 chain = 0 set freq to 218.75
2022-10-26 22:24:53 chain = 1 set freq to 218.75
2022-10-26 22:24:53 chain = 2 set freq to 218.75
2022-10-26 22:24:54 chain = 0 set freq to 225.00
2022-10-26 22:24:54 chain = 1 set freq to 225.00
2022-10-26 22:24:54 chain = 2 set freq to 225.00
2022-10-26 22:24:54 chain = 0 set freq to 231.25
2022-10-26 22:24:54 chain = 1 set freq to 231.25
2022-10-26 22:24:54 chain = 2 set freq to 231.25
2022-10-26 22:24:54 chain = 0 set freq to 237.50
2022-10-26 22:24:54 chain = 1 set freq to 237.50
2022-10-26 22:24:54 chain = 2 set freq to 237.50
2022-10-26 22:24:54 chain = 0 set freq to 243.75
2022-10-26 22:24:54 chain = 1 set freq to 243.75
2022-10-26 22:24:54 chain = 2 set freq to 243.75
2022-10-26 22:24:55 chain = 0 set freq to 250.00
2022-10-26 22:24:55 chain = 1 set freq to 250.00
2022-10-26 22:24:55 chain = 2 set freq to 250.00
2022-10-26 22:24:55 chain = 0 set freq to 256.25
2022-10-26 22:24:55 chain = 1 set freq to 256.25
2022-10-26 22:24:55 chain = 2 set freq to 256.25
2022-10-26 22:24:55 chain = 0 set freq to 262.50
2022-10-26 22:24:55 chain = 1 set freq to 262.50
2022-10-26 22:24:55 chain = 2 set freq to 262.50
2022-10-26 22:24:56 chain = 0 set freq to 268.75
2022-10-26 22:24:56 chain = 1 set freq to 268.75
2022-10-26 22:24:56 chain = 2 set freq to 268.75
2022-10-26 22:24:56 chain = 0 set freq to 275.00
2022-10-26 22:24:56 chain = 1 set freq to 275.00
2022-10-26 22:24:56 chain = 2 set freq to 275.00
2022-10-26 22:24:56 chain = 0 set freq to 281.25
2022-10-26 22:24:56 chain = 1 set freq to 281.25
2022-10-26 22:24:56 chain = 2 set freq to 281.25
2022-10-26 22:24:57 chain = 0 set freq to 287.50
2022-10-26 22:24:57 chain = 1 set freq to 287.50
2022-10-26 22:24:57 chain = 2 set freq to 287.50
2022-10-26 22:24:57 chain = 0 set freq to 293.75
2022-10-26 22:24:57 chain = 1 set freq to 293.75
2022-10-26 22:24:57 chain = 2 set freq to 293.75
2022-10-26 22:24:57 chain = 0 set freq to 300.00
2022-10-26 22:24:57 chain = 1 set freq to 300.00
2022-10-26 22:24:57 chain = 2 set freq to 300.00
2022-10-26 22:24:57 chain = 0 set freq to 306.25
2022-10-26 22:24:57 chain = 1 set freq to 306.25
2022-10-26 22:24:58 chain = 2 set freq to 306.25
2022-10-26 22:24:58 chain = 0 set freq to 312.50
2022-10-26 22:24:58 chain = 1 set freq to 312.50
2022-10-26 22:24:58 chain = 2 set freq to 312.50
2022-10-26 22:24:58 chain = 0 set freq to 318.75
2022-10-26 22:24:58 chain = 1 set freq to 318.75
2022-10-26 22:24:58 chain = 2 set freq to 318.75
2022-10-26 22:24:58 chain = 0 set freq to 325.00
2022-10-26 22:24:58 chain = 1 set freq to 325.00
2022-10-26 22:24:58 chain = 2 set freq to 325.00
2022-10-26 22:24:59 chain = 0 set freq to 331.25
2022-10-26 22:24:59 chain = 1 set freq to 331.25
2022-10-26 22:24:59 chain = 2 set freq to 331.25
2022-10-26 22:24:59 chain = 0 set freq to 337.50
2022-10-26 22:24:59 chain = 1 set freq to 337.50
2022-10-26 22:24:59 chain = 2 set freq to 337.50
2022-10-26 22:24:59 chain = 0 set freq to 343.75
2022-10-26 22:24:59 chain = 1 set freq to 343.75
2022-10-26 22:24:59 chain = 2 set freq to 343.75
2022-10-26 22:25:00 chain = 0 set freq to 350.00
2022-10-26 22:25:00 chain = 1 set freq to 350.00
2022-10-26 22:25:00 chain = 2 set freq to 350.00
2022-10-26 22:25:00 chain = 0 set freq to 356.25
2022-10-26 22:25:00 chain = 1 set freq to 356.25
2022-10-26 22:25:00 chain = 2 set freq to 356.25
2022-10-26 22:25:00 chain = 0 set freq to 362.50
2022-10-26 22:25:00 chain = 1 set freq to 362.50
2022-10-26 22:25:00 chain = 2 set freq to 362.50
2022-10-26 22:25:01 chain = 0 set freq to 368.75
2022-10-26 22:25:01 chain = 1 set freq to 368.75
2022-10-26 22:25:01 chain = 2 set freq to 368.75
2022-10-26 22:25:01 chain = 0 set freq to 375.00
2022-10-26 22:25:01 chain = 1 set freq to 375.00
2022-10-26 22:25:01 chain = 2 set freq to 375.00
2022-10-26 22:25:01 chain = 0 set freq to 381.25
2022-10-26 22:25:01 chain = 1 set freq to 381.25
2022-10-26 22:25:01 chain = 2 set freq to 381.25
2022-10-26 22:25:01 chain = 0 set freq to 387.50
2022-10-26 22:25:01 chain = 1 set freq to 387.50
2022-10-26 22:25:01 chain = 2 set freq to 387.50
2022-10-26 22:25:02 chain = 0 set freq to 393.75
2022-10-26 22:25:02 chain = 1 set freq to 393.75
2022-10-26 22:25:02 chain = 2 set freq to 393.75
2022-10-26 22:25:02 chain = 0 set freq to 400.00
2022-10-26 22:25:02 chain = 1 set freq to 400.00
2022-10-26 22:25:02 chain = 2 set freq to 400.00
2022-10-26 22:25:02 chain = 0 set freq to 406.25
2022-10-26 22:25:02 chain = 1 set freq to 406.25
2022-10-26 22:25:02 chain = 2 set freq to 406.25
2022-10-26 22:25:03 chain = 0 set freq to 412.50
2022-10-26 22:25:03 chain = 1 set freq to 412.50
2022-10-26 22:25:03 chain = 2 set freq to 412.50
2022-10-26 22:25:03 chain = 0 set freq to 418.75
2022-10-26 22:25:03 chain = 1 set freq to 418.75
2022-10-26 22:25:03 chain = 2 set freq to 418.75
2022-10-26 22:25:03 chain = 0 set freq to 425.00
2022-10-26 22:25:03 chain = 1 set freq to 425.00
2022-10-26 22:25:03 chain = 2 set freq to 425.00
2022-10-26 22:25:04 chain = 0 set freq to 431.25
2022-10-26 22:25:04 chain = 1 set freq to 431.25
2022-10-26 22:25:04 chain = 2 set freq to 431.25
2022-10-26 22:25:04 chain = 0 set freq to 437.50
2022-10-26 22:25:04 chain = 1 set freq to 437.50
2022-10-26 22:25:04 chain = 2 set freq to 437.50
2022-10-26 22:25:04 chain = 0 set freq to 443.75
2022-10-26 22:25:04 chain = 1 set freq to 443.75
2022-10-26 22:25:04 chain = 2 set freq to 443.75
2022-10-26 22:25:04 chain = 0 set freq to 450.00
2022-10-26 22:25:04 chain = 1 set freq to 450.00
2022-10-26 22:25:04 chain = 2 set freq to 450.00
2022-10-26 22:25:05 chain = 0 set freq to 456.25
2022-10-26 22:25:05 chain = 1 set freq to 456.25
2022-10-26 22:25:05 chain = 2 set freq to 456.25
2022-10-26 22:25:05 chain = 0 set freq to 462.50
2022-10-26 22:25:05 chain = 1 set freq to 462.50
2022-10-26 22:25:05 chain = 2 set freq to 462.50
2022-10-26 22:25:05 chain = 0 set freq to 468.75
2022-10-26 22:25:05 chain = 1 set freq to 468.75
2022-10-26 22:25:05 chain = 2 set freq to 468.75
2022-10-26 22:25:06 chain = 0 set freq to 475.00
2022-10-26 22:25:06 chain = 1 set freq to 475.00
2022-10-26 22:25:06 chain = 2 set freq to 475.00
2022-10-26 22:25:06 chain = 0 set freq to 481.25
2022-10-26 22:25:06 chain = 1 set freq to 481.25
2022-10-26 22:25:06 chain = 2 set freq to 481.25
2022-10-26 22:25:06 chain = 0 set freq to 487.50
2022-10-26 22:25:06 chain = 1 set freq to 487.50
2022-10-26 22:25:06 chain = 2 set freq to 487.50
2022-10-26 22:25:07 chain = 0 set freq to 493.75
2022-10-26 22:25:07 chain = 1 set freq to 493.75
2022-10-26 22:25:07 chain = 2 set freq to 493.75
2022-10-26 22:25:07 chain = 0 set freq to 500.00
2022-10-26 22:25:07 chain = 1 set freq to 500.00
2022-10-26 22:25:07 chain = 2 set freq to 500.00
2022-10-26 22:25:07 chain = 0 set freq to 506.25
2022-10-26 22:25:07 chain = 1 set freq to 506.25
2022-10-26 22:25:07 chain = 2 set freq to 506.25
2022-10-26 22:25:07 chain = 0 set freq to 512.50
2022-10-26 22:25:07 chain = 1 set freq to 512.50
2022-10-26 22:25:07 chain = 2 set freq to 512.50
2022-10-26 22:25:08 chain = 0 set freq to 518.75
2022-10-26 22:25:08 chain = 1 set freq to 518.75
2022-10-26 22:25:08 chain = 2 set freq to 518.75
2022-10-26 22:25:08 chain = 0 set freq to 525.00
2022-10-26 22:25:08 chain = 1 set freq to 525.00
2022-10-26 22:25:08 chain = 2 set freq to 525.00
2022-10-26 22:25:08 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2022-10-26 22:25:08 start do_core_reset
2022-10-26 22:25:27 end do_core_reset
2022-10-26 22:25:37 set_voltage_by_steps to 1360.
2022-10-26 22:25:39 create thread pic_heart_beat_thread
2022-10-26 22:25:39 Init done!
2022-10-26 22:25:39 STATUS_OKAY
2022-10-26 22:25:39 start the cached job
2022-10-26 22:25:39 Version num 65536
2022-10-26 22:25:39 Mask num 0x1fffe000
2022-10-26 22:25:39 opt_multi_version = 65536, interval timeout = 2945120
2022-10-26 22:25:39 freq = 525, percent = 90, hcn = 4993, timeout = 2945120
2022-10-26 22:25:39 set_start_time_point total_tv_start_sys=191 total_tv_end_sys=192
2022-10-26 22:25:41 enable power watchdog: 0x0001
2022-10-26 22:54:44 30m avg rate is 101809.11 in 29 mins
2022-10-26 23:24:47 30m avg rate is 101605.12 in 30 mins
2022-10-26 23:54:49 30m avg rate is 102322.92 in 30 mins
2022-10-27 00:24:52 30m avg rate is 102183.84 in 30 mins
2022-10-27 00:54:55 30m avg rate is 101797.57 in 30 mins
2022-10-27 01:24:57 30m avg rate is 101957.60 in 30 mins
2022-10-27 01:55:00 30m avg rate is 102113.63 in 30 mins
2022-10-27 02:25:02 30m avg rate is 102373.50 in 30 mins
2022-10-27 02:55:05 30m avg rate is 101690.79 in 30 mins
2022-10-27 03:25:07 30m avg rate is 101947.84 in 30 mins
2022-10-27 03:55:10 30m avg rate is 101807.94 in 30 mins
2022-10-27 04:25:12 30m avg rate is 102110.05 in 30 mins
2022-10-27 04:55:15 30m avg rate is 101826.49 in 30 mins
2022-10-27 05:25:17 30m avg rate is 102188.68 in 30 mins
2022-10-27 05:55:20 30m avg rate is 101735.62 in 30 mins
2022-10-27 06:25:22 30m avg rate is 101908.01 in 30 mins
Firmware Version Thu Jun 9 13:06:22 CST 2022 IP Address 192.168.1.143 MAC 02:EA:BD:50:1D:59 Type Release