Your powerdraw is way too high for your hashrate. You should lower the voltage even more while retaining current core clock speeds or even raising core clocks at the same time.
As for the fan control, yeah, it doesn't work that good for now, but give developers some time - it's been just over a month that they have introduced it. I remember it took T-rex team a while to finesse their fan control as well
I'm not doing any undervolting, only locking core clock, memory oc is not touched at all. I think i need to install some app for that, dont want to do that. Electricity is free, just want lower temps if possible...
Did more testing, disabling autofan with speed limit is not working for selected GPU, if i put this --fanspeed=0,50 --fantemp=0,66 then miniZ will adjust fans for wrong GPU, in my situation it is adjusting GPU 0, but i tried to disable that feature for GPU 0.
Gpu 0 adjusted to 50 (not gpu 1 like in bat), gpu 1 is turned off by bios because temp is low.
[ 0d 0h 0m20s|16:15:47 06/11/2022] S: 0/0/0 105(104.7)Sol/s 272(272.3)W [ZelProof]- 39ms
0>RTX 3060 Ti [19] S: 0/0 [61 C/50%] 30.40 I/s 60.26(60.26)Sol/s 157(156.8)W clk=1605MHz mclk=7000MHz Sol/W=0.384
1>RTX 3060 [19] S: 0/0 [61 C/ 0%] 21.71 I/s 44.76(44.76)Sol/s 116(115.6)W clk=1650MHz mclk=7500MHz Sol/W=0.387here we can see that gpu 1 fan is turned on by gpu bios. Setting from bat is ignored.
[ 0d 0h 0m30s|16:15:57 06/11/2022] S: 0/0/0 104(104.3)Sol/s 276(275.9)W [ZelProof]- 39ms
0>RTX 3060 Ti [19] S: 0/0 [63 C/50%] 30.37 I/s 60.09(60.09)Sol/s 158(157.9)W clk=1605MHz mclk=7000MHz Sol/W=0.381
1>RTX 3060 [19] S: 0/0 [63 C/30%] 21.95 I/s 44.55(44.55)Sol/s 118(118.0)W clk=1650MHz mclk=7500MHz Sol/W=0.378If i put --fantemp=68,66 without --fanspeed to .bat file, fan speed for GPU 0 after start will become 0% and in ~40 sec GPU will be 90c. Dangerous feature.
[ 0d 0h 0m02s|16:38:53 06/11/2022] S: 0/0/0 105(105.2)Sol/s 85( 84.9)W [ZelProof]- 43ms
0>RTX 3060 Ti [19] S: 0/0 [62 C/77%] 30.42 I/s 60.69(60.69)Sol/s 48( 48.4)W clk=1605MHz mclk=7000MHz Sol/W=1.254
1>RTX 3060 [19] S: 0/0 [57 C/45%] 22.32 I/s 44.53(44.53)Sol/s 37( 36.5)W clk=1650MHz mclk=7500MHz Sol/W=1.220
[ 0d 0h 0m10s|16:39:01 06/11/2022] S: 1/0/0 105(104.8)Sol/s 276(276.2)W [ZelProof]- 47ms
0>RTX 3060 Ti [19] S: 1/0 [70 C/74%]*30.37 I/s 60.58(60.58)Sol/s 160(159.7)W clk=1605MHz mclk=7000MHz Sol/W=0.379
1>RTX 3060 [19] S: 0/0 [64 C/45%] 22.19 I/s 44.27(44.27)Sol/s 116(116.5)W clk=1650MHz mclk=7500MHz Sol/W=0.380
[ 0d 0h 0m20s|16:39:11 06/11/2022] S: 1/0/0 104(103.8)Sol/s 285(284.5)W [ZelProof]- 47ms
0>RTX 3060 Ti [19] S: 1/0 [74 C/ 0%] 30.32 I/s 61.41(61.41)Sol/s 166(165.9)W clk=1605MHz mclk=7000MHz Sol/W=0.370
1>RTX 3060 [19] S: 0/0 [65 C/44%] 22.18 I/s 42.50(42.50)Sol/s 119(118.6)W clk=1650MHz mclk=7500MHz Sol/W=0.358
[ 0d 0h 0m30s|16:39:21 06/11/2022] S: 1/0/0 103(103.3)Sol/s 290(289.7)W [ZelProof]- 47ms
0>RTX 3060 Ti [19] S: 1/0 [80 C/ 0%] 30.31 I/s 61.13(61.13)Sol/s 170(170.3)W clk=1605MHz mclk=7000MHz Sol/W=0.359
1>RTX 3060 [19] S: 0/0 [64 C/74%] 22.18 I/s 42.05(42.05)Sol/s 119(119.4)W clk=1650MHz mclk=7500MHz Sol/W=0.352
[ 0d 0h 0m40s|16:39:31 06/11/2022] S: 2/0/0 107(107.2)Sol/s 296(295.4)W [ZelProof]- 51ms
0>RTX 3060 Ti [19] S: 2/0 [88 C/ 0%]*30.31 I/s 63.97(63.97)Sol/s 175(175.1)W clk=1530MHz mclk=7000MHz Sol/W=0.365
1>RTX 3060 [19] S: 0/0 [63 C/96%] 22.08 I/s 43.23(43.23)Sol/s 120(120.4)W clk=1650MHz mclk=7500MHz Sol/W=0.359In all my tests, after any --fanspeed or --fantemp settings change, rig (win10, 1.9z5b) was restarted, because gpu fan adjustment from bat file became unpredictable/uncontrollable.
So, Asus 3060 Ti Dual LHR is one more videocard, that is not working with miniZ autofan feature (GPU 0 in log, GPU 1 - Gainward 3060 Ghost, v1/non-LHR).