Quote from: BitMaxz on November 18, 2022, 11:04:09 PM

If it's a 3.2v I believe the test point you are checking is the LDO power supply that's the normal value. Also, check its resistance if it's shorted or has abnormal resistance.

If I were you don't go directly to hardware better start to diagnose the issue through the miner's logs and it might be just a PIC program issue. Replacing it with working PIC file should fix this issue you can get the PIC file from other known working hashboard.

The LDO is not normal value of 3.2v, it should be 1.8v as the other LDO's are reading 1.8v and I have another working hashboard to compare to. Which is lso 1.8v.

You can't goto the miner logs, if the boards reads: 0 ASICs found!

Thanks for you help anyways.