Every so often CG will get semi stuck loading and continue to scroll lines simular to these instead of snaping over to the usual info screen. When it does this it gets stuck in a 100% cpu cycle as well. Anyone ran into this or know a trick to make it snap out of this?  Runing on Linuxcoin


GPU3 65.5C 4416RPM | (5s):367.7 (avg):377.8 Mh/s | A:4 R:0 HW:0 U:4.28/m I:8
[2011-11-11 05:18:00] Accepted 00000000.20423bc9.16f0315a GPU 3 thread 3 pool 0
GPU3 65.5C 4424RPM | (5s):367.2 (avg):364.7 Mh/s | A:5 R:0 HW:0 U:4.90/m I:8
[2011-11-11 05:18:15] Accepted 00000000.94461584.8ff63b0c GPU 0 thread 0 pool 0
GPU0 49.5C 3894RPM | (5s):381.7 (avg):301.4 Mh/s | A:6 R:0 HW:0 U:4.72/m I:8
[2011-11-11 05:18:20] Accepted 00000000.5cf906f6.e555ca88 GPU 0 thread 4 pool 0
GPU0 49.5C 3893RPM | (5s):360.2 (avg):304.5 Mh/s | A:7 R:0 HW:0 U:5.16/m I:8
[2011-11-11 05:18:30] Accepted 00000000.8b064e1b.0dd4d4b1 GPU 3 thread 3 pool 0
GPU3 67.5C 4408RPM | (5s):365.8 (avg):365.0 Mh/s | A:6 R:0 HW:0 U:3.94/m I:8
[2011-11-11 05:18:30] Accepted 00000000.17fb4ae9.423f126f GPU 0 thread 4 pool 0
GPU0 49.5C 3891RPM | (5s):300.5 (avg):299.0 Mh/s | A:8 R:0 HW:0 U:5.25/m I:8
[2011-11-11 05:18:35] Accepted 00000000.f760b72e.86c3089d GPU 0 thread 4 pool 0
GPU0 49.5C 3899RPM | (5s):248.0 (avg):299.9 Mh/s | A:9 R:0 HW:0 U:5.60/m I:8
[2011-11-11 05:18:43] Accepted 00000000.59468a07.537e6686 GPU 0 thread 4 pool 0
GPU0 49.5C 3903RPM | (5s):379.4 (avg):295.9 Mh/s | A:10 R:0 HW:0 U:5.63/m I:8
[2011-11-11 05:18:52] Accepted 00000000.dad5cb3c.2d27ac9d GPU 1 thread 5 pool 0