Hello

Thanks for the reply sorry about late response have not had a lot of time to mess with it but had a go today.

Its seems that if I leave miner to sit for a while and plug back in a week or two later it starts to hash although at lower rate and the temp seems to go higher than usually and I shut it down due to I am worried about temp.

Today I turned it on and it was hashing just under 50 ths


https://www.dropbox.com/s/1o9tmsfq5uituao/Screenshot%202023-02-25%2010.56.48.png?dl=0

I copied the log as well


https://www.dropbox.com/s/m9p11xp5olzwywh/Screenshot%202023-02-25%2010.56.59.png?dl=0


So I assume by hashrate that one board is faulty?
How do I know which one is faulty?

Would the miner run with just 2 boards?

I will attach other logs taken.

https://www.dropbox.com/s/si75cvmo3z34ler/Screenshot%202023-02-25%2010.38.39.png?dl=0

https://www.dropbox.com/s/6wn8uen4x0v421s/Screenshot%202023-02-25%2010.38.46.png?dl=0

Thanks for any advice