Quote from: mikeywith on Today at 02:39:27 AM

This shows that the 3rd chain is dead, in the op it was chain 0 ( labeled 1 in the GUI), did you swap these two hashboards?

Yes he did that was my suggestion on my previous post to know if the cable is damaged or the hashboard is dead.

Quote from: deafgoose on Today at 12:07:26 AM

Don't you find it strange that its defective yet no issue with my logs?

I am very unlucky. I dont have the sd-card version. I will order the adapter and load up Braiins OS and report back.

EDIT: Will this adapter work?
https://www.amazon.ca/Sandisk-SDDD3-016G-G46-Cellphone-Signal-Booster/dp/B01M1272LZ/

I don't see any strange logs except on the abandon mix board and 0 ASIC on the 3rd hashboard.
If we see these logs like the Abadon mix board the first thing that comes to my mind like Philipma1957 said that 3rd hashboard might be a replacement board which is why it stop mining due to the EEPROM compatibility issue.

About the OTG SanDisk, that thing might work but I'm not sure if the s19j pro USB port support USB 3.0 and it's a bit expensive why not just buy a Micro USB port to USB female connector which is cheaper if you already have a USB flash drive.