Re: [∞ YH] solo.ckpool.org 2% fee solo mining 276 blocks solved!
My S9J is pulling around 500 watts in its current configuration since the other two blades failed a long time ago probably due to running on 110v. It did three blades for about a year before two of them wiped themselves out. Restoration on them failed. So many of the ASIC chips burned up and there were OL everywhere.
Currently it is venting to the attic and then to atmosphere; intake has a used K&N car filter cone on it and is quietly churning at 4.8 TH in the closet at a steady 88C.
Currently it is venting to the attic and then to atmosphere; intake has a used K&N car filter cone on it and is quietly churning at 4.8 TH in the closet at a steady 88C.
Thanks for the info, I was considering getting an S9 series miner but on the looks of power consumption alone its just not worth it.
I might try and get an S17 pro instead and run that on 1 card, that should give about 14-16T at around 600Watts
Thanks
G.
I agree with your assessment completely! Sell the cards you don't use before all this equipment becomes less than worthless lol
