I hope someone can point me in the right direction here. i been looking for hours and cant get individual unit freq tuned. And i cant find a good post on it.

i running 31 units on a ubuntu box. i modded 5 units some with resistors and some with just the bridges. i ran each unit individual on my raspi and found the freq they will run at without Hw's. i was using scripta or the pi to do this with.

i did a git pull from "git://github.com/dtbartle/cgminer-gc3355.git"

when i enter
"
sudo ./cgminer --scrypt -o site -u username -p x --gridseed-options=baud=115200,freq=850,chips=5 --gridseed-freq 8D8B16785748=1150,8D9123A95748=950,8D6A187B5355=950,8D6A187B5355=900,8D70218C5355=950,6D95246D5650=950 --hotplug 0
"

it says "./cgminer: --gridseed-freq: unrecognized option"



i running 31 units on a ubuntu box. i modded 5 units some with resistors and some with just the bridges. i ran each unit individual on my raspi and found the freq they will run at with out Hw's. i was using scripta or the pi to do this with.

Does this version not support freq tuning? i believe i read else where it does per miner but im thinking that was a different version and not this one.