1. + Added support for algorithm 'dynex' on NVIDIA GPUs

How to use it?
______________________________________________________________________________
Detected GPU devices

GPU0 

• [3] [03:00.0] : amd_radeon_rx_6600_xt [gfx1032] [8176 MB] [CU: 32] [MaxBuf: 7920 MB]

GPU1 

• [07:00.0] : amd_radeon_rx_6600_xt [gfx1032] [8176 MB] [CU: 32] [MaxBuf: 7920 MB]

GPU2 

• [1] [0a:00.0] : amd_radeon_rx_6600_xt [gfx1032] [8176 MB] [CU: 32] [MaxBuf: 7920 MB]

GPU3  [1][0] [0b:00.0] : geforce_rtx_3090 [ampere] [24576 MB] [CU: 4294967378] [MaxBuf: 6144 MB]
GPU4  [1][1] [0e:00.0] : geforce_rtx_3090 [ampere] [24576 MB] [CU: 4294967378] [MaxBuf: 6144 MB]
GPU5 

• [2] [12:00.0] : amd_radeon_rx_6600_xt [gfx1032] [8176 MB] [CU: 32] [MaxBuf: 7920 MB]

_______________________________________________________________________________ _
but 3090 still need enother miner
_______________________________________________________________________________ _

GPU0 : amd_radeon_rx_6600_xt                 [gfx1032       ][MEM:  8 GB][CU:   32][BUS: 03]
GPU1 : amd_radeon_rx_6600_xt                 [gfx1032       ][MEM:  8 GB][CU:   32][BUS: 07]
GPU2 : amd_radeon_rx_6600_xt                 [gfx1032       ][MEM:  8 GB][CU:   32][BUS: 0a]
GPU5 : amd_radeon_rx_6600_xt                 [gfx1032       ][MEM:  8 GB][CU:   32][BUS: 12]

===============================
SRBMiner-MULTI 2.3.7

Press z-v to disable/enable algorithm 0-3
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
===============================
Algorithm/s         : dynex+zil [2.50% fee]+[0.00% fee]
Gpu mining          : enabled
Cpu mining          : disabled
Watchdog            : enabled
___________________________________________________________________________


2. ------ZIL mining got stuck for more than 300 seconds! Disabled ZIL mining.--------
Each zil-round i have that.
May be could be better lower than 300? Idk, may bе 80-100-120?
I'm using old rustpool.xyz.