As I said. DON'T go full 400Hz. Look at mine it hits 200GH/s but low Hardware Error % and good Temp and don't for get the Heatsinks for the Converters (Total of 8 )
may I ask what hex code you're using for 393 MHZ ?
I tried '5f82' but got 2.5% on many of my machines, but going for 387MHZ using hex code '5e82' seems to give me 0.5% error with 3 Ghz less total hash output. This seems to be consistent across atleast 10 of my S1 ants
I am still a noob XD but I played around alot. Those settings are the best for speed and low HW Error % Rate
Maybe as a return you can help me to find a fan. 120mm 100-130 cfm by a lower then 50 dBA with max 1.05 Amp Put my Delta on the unit via direct power-supply gets the antminer down to 37 C.......but plus 4 Amps @65dBA. That is the noise level of a industrial floor cleaner.
BTW NEVER EVER put that thing on the Blade....EVER 4Amps pulls 45 Watt. So I assume the blade will burn off. Just a guess never tryed it.
Jomant's Magic Settings for 200 GH/s and a Hardware Error Rate of 0.69 %
Tip me some BTC if it works for you
option freq_value 5f05′
option chip_freq 393.75′
option timeout 36′