Re: 1 x PCIE 6PIN cnnector -> 10 Barrel tips after modding Vmod3 ???

The amount of power plugs (or barrels) which you can connect is directly determined by the amount of watt you have available. (Amount of watt you have) divided by (the amount of devices you want to power * the watt each requires). If the result is less than 1.00 then Bad. If over 1.00 then Good

Thanks, Ok so lets just say I have 1200watt available .. What I was asking is will 1 single 6PIN Pcie connector going into 10 Barrels -be sufficient for 10 v3modded grids? Since they are like 20-25watt each thats like 250watt max On a single 6PIN, .... I have a few here that came with my grids, 1 PCIE (6pin) going into 10 barrels, but this was created for unmodded pods which is why i am not sure if we can still plug 10 in if they are modded.

Single 6-pin PCI-E Connector is rated @ 75W ...12V power delivery...about 6.5 Amp = 3 OC gridseed...

Single 8-pin PCI-E Connector is rated @ 150W ...12V power delivery...about 13 Amp = 6 OC gridseed...

Hope it helps, buddy...

ZiG

What I was stating is the STANDARD specs for 6- and 8-pin PCI-E connector...
Of course nobody is preventing you from trying to suck few more Amp out of them...over the rated specs...Like overclocking the CPU/GPU...at your own risk...they have some reserves...

Your question was how many Gridseeds to run of them... Wink

Maybe 5...and 10 max...but you are pushing it...

GPU is getting additional 75 W from the PCI-E slot 16x or 8x ...I did not mention that because Gridseeds don't use PCI-E slot or interface...

This is not invalidating the PCI-E specs above...

FYI...I used to run 5 GPU rigs...3 x 290x each...14MH total...just sold them last week at lost... Huh