Guys help please!
I made an "old" mod, not the latest ZiG one, but all i get is HW, even on 850 Mhz
Here is the picture of my unit. I did not solder the voltage=1 pins (vertical yellow line in instructions). Should that be a reason, why I'm getting only HW errors?
Btw I used 47k resistor, but did not have 0402, so used a bigger one..
so all I'm getting now is (no matter which frequency):
Please help!
I made an "old" mod, not the latest ZiG one, but all i get is HW, even on 850 Mhz
Here is the picture of my unit. I did not solder the voltage=1 pins (vertical yellow line in instructions). Should that be a reason, why I'm getting only HW errors?
Btw I used 47k resistor, but did not have 0402, so used a bigger one..
so all I'm getting now is (no matter which frequency):
Please help!
Why? I don't get it. Nemercry's replacement of R52 (I think it's his mod) is the only and final mod needed. I thought this was clear to everyone.
I believe the 5V Ultra Quiet Fan USB mod is my mod too. At least, that's what the sequence of events led me to coming up with and reporting, also eons ago.
I found and reported eons ago that the 49.9K 1% tolerance resistor and even at 1200MHz only and don't use anywhere near 20W of power - if I recall correctly. I wanna say it's around 12W or so. No HW errors in general and each miner has its own sweet spot/speed too. I can measure the power consumption again, if anyone wants me to.
Gotta love experimentation! It's fun but sometimes, so unnecessary.
I think we've go the pods mining as efficiently as possible.
I do agree as well that if one wants to go back to mining SHA, change the resistor value back to 33K.
Interesting too about R52 vs R139 and still, everyone replaced the right resistor
