Hi - looking for assistance with this please. Got an AvalonMiner 1166Pro here, works fine with all 3 boards. Deliberately disconnected one of the boards as the wall socket was getting too hot for my liking and wanted to draw less power so thought 2/3 would be fine. Miner seems to get stuck in reboot loop after 5 minutes. There was one time where it went green and continued mining on 2/3 boards as planned but hasn't done it again since. The log isn't very helpful compared to the Antminers so no idea what it's actually doing behind the scenes. Can anyone advise on how to resolve this please - basically looking to override and make it run on 2/3 boards only, there is no faulty board and it's fully working (eg didn't buy a junk parts miner). Thanks in advance