Keep the initial setup simple as it is now. But.....
Add some more settings to the System Config page?
I am sure everyone that mines wants to set their miners to certain IP addresses. DHCP is not working the way I want. I set an assigned IP in my router but the hub is still using the original one it was assigned. I did a system reboot, put the wrong wifi password in on purpose, it still set it to the old IP. It seems to be "stuck".
Add a Workers page with a list and stats of each miner. Easier to see if one is not working properly.
01. R909 100050786 2.142Th 550 etc Red is in error, yellow if warning
02. R909 100xxxxxx 2.201Th 550 etc
03. Compaq F 200346543 350Gh 450
....
10. R909
Total hash rate in large font.
Plenty of room for more stats/details.
if you want to define a static IP on the SmartHub, edit the /etc/dhcpcd.conf file and define your static IP. Dont assign it in the router, assign it on the Hub itself.
All of the stat' bits you mention will all come in due course, embedded in the SmartHub Gui. This is one of the reasons I linked Kano's stats page directly from the SmartHub UI, to give people the extra stats you describe in the meantime.