I hooked up my nano 3 this one came from davef I am using the 165watt dell psu

I set it to high and it reads 127 watts on the software screen.

I will slap in a kill-watt-meter

also I have a infrared thermometer lets see if the 165watt dell psu gets to a stupid temp.

gets to 121 temp better than 140 that the others get to but stupid hot

i read 125-127 watts for full speed on the software screen. the kwatt meter reads 141.

So 141 watts and 4.15 th is just over 31 watts a th.

backed it off to middle sitting.

85-88 watts on avalon screen
98 watts on kill-a-watt
3.05th
psu case is 129 f


like the miner.
don’t like that you must use an app rather just log in. the log in does not have speed control
so you will always use both the login and the app. note could be missing a way to use pc to change speeds.


I don’t like a lack of eth cable

but running it at middle speed does seem sweet.