..................
- Reversible VMOD3 added (Courtesy of ZiG)
Step B) If you want to revert to VMOD1 simply solder together both of the two point sets shown [in Figure 7].
....................
Jess85 - Step B needs clarification as it has merged two separate mods. ZiG's rmod requires that you cut the bridge at R46 then one method is to solder the resistor as described. To reverse ZiG's rmod you would remove the resistor and re-solder the bridge at R46. Then you could do VMOD1 if you want but vmod1 has nothing to do with ZiG's rmod.