A few questions about the Sandor11 cpuminer when used with 5 chip gridseed

1. How do you know the Autotune has completed ? From what I understand Autotune will increase is small steps 25 Mhz if not more than 3 hardware errors are detected if this is the case it drop down by 25 Mhz.

I just see these type of messages

[2014-04-29 22:33:4.217] 8@0 850MHz: Got nonce 70fe0200, Hash <= Htarget!
[2014-04-29 22:33:4.219] 8@0: 2821 steps until frequency adjusts to 875MHz
[2014-04-29 22:33:4.232] 8@0: accepted 3/3 (100.00%) 72.0/143.5/2152.9 (Pool: 2391.5) KH/s

I've never seen any message about Autotune having  completed  how is the end result displayed

2. Is it possible to dual mine Scrypt and SHA256 using Sandor11 cpuminer, and or in conjunction with another miner.

3. I have one Gridseed miner that only has a red flashing LED, Green one never turns on. it seems to be working fine. this is a replacement unit from ZoomHash wondering if I have another lemon.

cpuminer-gc3355 - Started: [2014-04-29 22:32:07]
=============================================================================
(2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0
Connected to useast.wafflepool.com:3333 diff 512 with stratum as user 1.........
=============================================================================
GSD 0 | 850 MHz | 522.2/287.3 KH/s | A: 7 R: 1 H: 0

=============================================================================
[2014-04-29 22:40:00] Stratum detected new block
[2014-04-29 22:40:00] Dispatching new work to GC3355 threads (0x6280ca50)

thank you.