I recently purchased a new miner that I am having issues getting it up and running. It was shipped with Luxor firmware which I could never get to work. I managed to get it back to the default Bitmain firmware, but I cannot for the life of me get it to mine. To level set, I have a small mining farm and have been mining for about 5-6 years now so this is not something new to me. Below is a copy of the kernel log for your consideration. Any advice would be much appreciated!
_____________________________________________________________
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Mon Dec 26 17:29:52 CST 2022
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB
[ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc:
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 211688K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29976K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016908@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036437@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106465@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114386@0] SELinux: Starting in permissive mode
[ 0.114422@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128836@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186540@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187357@0] CPU0: update cpu_capacity 1024
[ 0.191684@0] ASID allocator initialised with 32768 entries
[ 0.229824@0] secmon: can't fine clear_range
[ 0.230029@0] EFI services will not be available.
[ 0.233295@0] Meson chip version = RevC (25:C - 23:0)
[ 0.266968@1] Detected VIPT I-cache on CPU1
[ 0.267028@1] CPU1: update cpu_capacity 1024
[ 0.267030@1] CPU1: Booted secondary processor [410fd034]
[ 0.295036@2] Detected VIPT I-cache on CPU2
[ 0.295089@2] CPU2: update cpu_capacity 1024
[ 0.295091@2] CPU2: Booted secondary processor [410fd034]
[ 0.323101@3] Detected VIPT I-cache on CPU3
[ 0.323151@3] CPU3: update cpu_capacity 1024
[ 0.323154@3] CPU3: Booted secondary processor [410fd034]
[ 0.323241@0] Brought up 4 CPUs
[ 0.362460@0] SMP: Total of 4 processors activated.
[ 0.367368@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373405@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.383959@0] CPU: All CPU(s) started at EL2
[ 0.385145@0] alternatives: patching kernel code
[ 0.390445@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397672@0] devtmpfs: initialized
[ 0.412693@0] DMI not present or invalid.
[ 0.413085@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.421062@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427642@0] pinctrl core: initialized pinctrl subsystem
[ 0.434012@0] NET: Registered protocol family 16
[ 0.457590@0] cpuidle: using governor menu
[ 0.458100@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463703@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471106@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477239@0] clkmsr: clkmsr: driver init
[ 0.481301@0] aml_watch_point_probe, in, wp:2
[ 0.486746@0] pstore: using zlib compression
[ 0.490144@0] console [pstore-1] enabled
[ 0.493579@0] pstore: Registered ramoops as persistent store backend
[ 0.499987@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514361@0] aml_iomap: amlogic iomap probe done
[ 0.521169@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523099@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.612512@0] usbcore: registered new interface driver usbfs
[ 0.612674@0] usbcore: registered new interface driver hub
[ 0.618333@0] usbcore: registered new device driver usb
[ 0.623590@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.628525@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.637913@0] PTP clock support registered
[ 0.642274@0] dmi: Firmware registration failed.
[ 0.647257@0] secmon: reserve_mem_size:0x300000
[ 0.651291@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.658133@0] secmon: get page:ffffffbf00140000, 5000
[ 0.662890@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.671279@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.679151@0] NetLabel: Initializing
[ 0.681330@0] NetLabel: domain hash size = 128
[ 0.685914@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.691147@0] NetLabel: unlabeled traffic allowed by default
[ 0.697782@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.824620@0] VFS: Disk quotas dquot_6.6.0
[ 0.824769@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.850849@1] NET: Registered protocol family 2
[ 0.851896@1] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.857141@1] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.863754@1] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.870329@1] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.876298@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.883045@1] NET: Registered protocol family 1
[ 0.888019@1] RPC: Registered named UNIX socket transport module.
[ 0.893437@1] RPC: Registered udp transport module.
[ 0.898323@1] RPC: Registered tcp transport module.
[ 0.903221@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.912361@1] Unpacking initramfs...
[ 1.412959@0] Initramfs unpacking failed: junk in compressed archive
[ 1.419802@0] Freeing initrd memory: 6572K
[ 1.420709@0] hw perfevents: clusterb_enabled = 0
[ 1.423034@0] hw perfevents: cpumasks 0xf, 0x0
[ 1.427508@0] hw perfevents: cluster A irq = 7
[ 1.432082@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.442280@0] audit: initializing netlink subsys (disabled)
[ 1.445546@0] audit: type=2000 audit(1.256:1): initialized
[ 1.452893@0] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.476969@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.479962@0] NFS: Registering the id_resolver key type
[ 1.482683@0] Key type id_resolver registered
[ 1.486999@0] Key type id_legacy registered
[ 1.491652@0] fuse init (API version 7.26)
[ 1.496999@0] SELinux: Registering netfilter hooks
[ 1.503150@0] NET: Registered protocol family 38
[ 1.503212@0] Key type asymmetric registered
[ 1.506454@0] Asymmetric key parser 'x509' registered
[ 1.511947@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.519155@0] io scheduler noop registered (default)
[ 1.524128@0] io scheduler deadline registered
[ 1.528951@0] io scheduler cfq registered
[ 1.549242@2] random: fast init done
[ 1.549340@2] random: crng init done
[ 1.549852@0] Unable to detect cache hierarchy for CPU 0
[ 1.586205@0] loop: module loaded
[ 1.587720@0] zram: Added device: zram0
[ 1.588113@0] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.595110@0] libphy: Fixed MDIO Bus: probed
[ 1.599494@0] tun: Universal TUN/TAP device driver, 1.6
[ 1.603973@0] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.612155@0] ee eth reset:Addr = ffffff80081fd008
[ 1.619647@0] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.621597@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.626870@0] Ring mode enabled
[ 1.630104@0] DMA HW capability register supported
[ 1.634819@0] Normal descriptors
[ 1.638150@0] RX Checksum Offload Engine supported
[ 1.643044@0] COE Type 2
[ 1.645651@0] TX Checksum insertion supported
[ 1.650138@0] Wake-Up On Lan supported
[ 1.654071@0] Enable RX Mitigation via HW Watchdog Timer
[ 1.667494@0] libphy: stmmac: probed
[ 1.667550@0] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.674034@0] PPP generic driver version 2.4.2
[ 1.676929@0] PPP BSD Compression module registered
[ 1.681491@0] PPP Deflate Compression module registered
[ 1.686748@0] PPP MPPE Compression module registered
[ 1.691701@0] NET: Registered protocol family 24
[ 1.697211@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.703123@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.710157@0] usbcore: registered new interface driver cdc_acm
[ 1.715342@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.723779@0] usbcore: registered new interface driver usbserial
[ 1.730449@0] mousedev: PS/2 mouse device common for all mice
[ 1.735876@0] usbcore: registered new interface driver xpad
[ 1.741276@2] i2c /dev entries driver
[ 1.746096@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.750322@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.761156@2] ff803000.serial: clock gate not found
[ 1.762869@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.770047@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.784955@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.787662@2] console [ttyS0] enabled
[ 1.794883@2] bootconsole [aml_uart0] disabled
[ 1.804541@3] ff804000.serial: clock gate not found
[ 1.808667@3] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.815767@3] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.826158@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.832248@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.842446@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.848750@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.859650@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.868987@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.875512@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.890507@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.894325@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.906673@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.909740@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.914884@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.921230@0] efusekeynum: 4
[ 1.923564@0] efusekeyname: mac offset: 0 size: 6
[ 1.929943@0] efusekeyname: mac_bt offset: 6 size: 6
[ 1.936349@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 1.942760@0] efusekeyname: usid offset: 18 size: 16
[ 1.949597@3] efuse efuse: probe OK!
[ 1.955110@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.962334@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.967327@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.972564@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.017923@0] meson-mmc: meson_mmc_probe() : success!
[ 2.018181@0] amlogic mtd driver init
[ 2.022269@0] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.026999@0] bl mode descrete
[ 2.029883@0] fip_copies 4
[ 2.032537@0] fip_size 0x200000
[ 2.035678@0] nand_clk_ctrl 0xffe07000
[ 2.039409@0] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.045068@0] nand_clk_ctrl 0xffe07000
[ 2.048798@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.057535@0] plat->aml_nand_device ffffff800a005c10
[ 2.061695@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.067769@0] NAND device id: 2c da 90 95 6 0
[ 2.071883@0] NAND device: Manufacturer ID:
[ 2.075892@0] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.082934@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.088368@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.093915@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.100160@0] mtd->oobavail: 0x8
[ 2.103555@0] aml_nand_init 2119: plat-name:bootloader
[ 2.108479@0] Creating 1 MTD partitions on "bootloader":
[ 2.113783@0] 0x000000000000-0x000000200000 : "bootloader"
[ 2.122691@1] bootloader initialized ok
[ 2.123028@1] plat->aml_nand_device ffffff800a005c10
[ 2.128002@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.134142@1] NAND device id: 2c da 90 95 6 0
[ 2.138126@1] NAND device: Manufacturer ID:
[ 2.142202@1] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.149233@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.154676@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.160216@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.166464@1] mtd->oobavail: 0x8
[ 2.169877@1] aml_nand_init 2119: plat-name:nandnormal
[ 2.174811@1] bbt_start=20
[ 2.177441@1] env_start=24
[ 2.180155@1] key_start=32
[ 2.182834@1] dtb_start=40
[ 2.185501@1] ddr_start=44
[ 2.188208@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.194699@1] get_free_node 43: bitmap=0
[ 2.198176@1] get_free_node 55: bitmap=1
[ 2.202267@1] get_free_node 43: bitmap=1
[ 2.205974@1] get_free_node 55: bitmap=3
[ 2.210066@1] get_free_node 43: bitmap=3
[ 2.213756@1] get_free_node 55: bitmap=7
[ 2.217658@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.224345@1] nbbt free list:
[ 2.227293@1] blockN=21, ec=-1, dirty_flag=0
[ 2.231539@1] blockN=22, ec=-1, dirty_flag=0
[ 2.235785@1] blockN=23, ec=-1, dirty_flag=0
[ 2.240034@1] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.245441@1] nbbt valid addr: 280000
[ 2.248702@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.254335@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.260595@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.267022@1] get_free_node 43: bitmap=7
[ 2.270541@1] get_free_node 55: bitmap=f
[ 2.274632@1] get_free_node 43: bitmap=f
[ 2.278341@1] get_free_node 55: bitmap=1f
[ 2.282519@1] get_free_node 43: bitmap=1f
[ 2.286314@1] get_free_node 55: bitmap=3f
[ 2.290491@1] get_free_node 43: bitmap=3f
[ 2.294287@1] get_free_node 55: bitmap=7f
[ 2.298465@1] get_free_node 43: bitmap=7f
[ 2.302261@1] get_free_node 55: bitmap=ff
[ 2.306438@1] get_free_node 43: bitmap=ff
[ 2.310242@1] get_free_node 55: bitmap=1ff
[ 2.314500@1] get_free_node 43: bitmap=1ff
[ 2.318381@1] get_free_node 55: bitmap=3ff
[ 2.322455@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.329125@1] nenv free list:
[ 2.332072@1] blockN=25, ec=-1, dirty_flag=0
[ 2.336318@1] blockN=26, ec=-1, dirty_flag=0
[ 2.340565@1] blockN=27, ec=-1, dirty_flag=0
[ 2.344812@1] blockN=28, ec=-1, dirty_flag=0
[ 2.349059@1] blockN=29, ec=-1, dirty_flag=0
[ 2.353305@1] blockN=30, ec=-1, dirty_flag=0
[ 2.357552@1] blockN=31, ec=-1, dirty_flag=0
[ 2.361800@1] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.373161@1] nenv valid addr: 300000
[ 2.373195@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.377558@1] get_free_node 43: bitmap=3ff
[ 2.381440@1] get_free_node 55: bitmap=7ff
[ 2.385702@1] get_free_node 43: bitmap=7ff
[ 2.389586@1] get_free_node 55: bitmap=fff
[ 2.393852@1] get_free_node 43: bitmap=fff
[ 2.397715@1] get_free_node 55: bitmap=1fff
[ 2.402085@1] get_free_node 43: bitmap=1fff
[ 2.406053@1] get_free_node 55: bitmap=3fff
[ 2.410404@1] get_free_node 43: bitmap=3fff
[ 2.414373@1] get_free_node 55: bitmap=7fff
[ 2.418723@1] get_free_node 43: bitmap=7fff
[ 2.422693@1] get_free_node 55: bitmap=ffff
[ 2.427044@1] get_free_node 43: bitmap=ffff
[ 2.431013@1] get_free_node 55: bitmap=1ffff
[ 2.435450@1] get_free_node 43: bitmap=1ffff
[ 2.439506@1] get_free_node 55: bitmap=3ffff
[ 2.443753@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.450424@1] nkey free list:
[ 2.453354@1] blockN=32, ec=-1, dirty_flag=0
[ 2.457618@1] blockN=33, ec=-1, dirty_flag=0
[ 2.461865@1] blockN=34, ec=-1, dirty_flag=0
[ 2.466110@1] blockN=35, ec=-1, dirty_flag=0
[ 2.470358@1] blockN=36, ec=-1, dirty_flag=0
[ 2.474604@1] blockN=37, ec=-1, dirty_flag=0
[ 2.478851@1] blockN=38, ec=-1, dirty_flag=0
[ 2.483097@1] blockN=39, ec=-1, dirty_flag=0
[ 2.487344@1] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.492458@1] nkey valid addr: fffffffffffe0000
[ 2.496965@1] aml_nand_key_check 1251 NO key exist
[ 2.501732@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.508164@1] get_free_node 43: bitmap=3ffff
[ 2.512220@1] get_free_node 55: bitmap=7ffff
[ 2.516845@1] get_free_node 43: bitmap=7ffff
[ 2.520713@1] get_free_node 55: bitmap=fffff
[ 2.525151@1] get_free_node 43: bitmap=fffff
[ 2.529206@1] get_free_node 55: bitmap=1fffff
[ 2.533539@1] ndtb : phy_blk_addr=41, ec=0, phy_page_addr=0, timestamp=2
[ 2.540210@1] ndtb free list:
[ 2.543157@1] blockN=40, ec=-1, dirty_flag=0
[ 2.547404@1] blockN=42, ec=-1, dirty_flag=0
[ 2.551651@1] blockN=43, ec=-1, dirty_flag=0
[ 2.555898@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.573143@1] ndtb valid addr: 520000
[ 2.573177@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.577619@1] get_free_node 43: bitmap=1fffff
[ 2.581772@1] get_free_node 55: bitmap=3fffff
[ 2.586285@1] get_free_node 43: bitmap=3fffff
[ 2.590427@1] get_free_node 55: bitmap=7fffff
[ 2.594761@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.601431@1] nddr free list:
[ 2.604379@1] blockN=44, ec=-1, dirty_flag=0
[ 2.608626@1] blockN=45, ec=-1, dirty_flag=0
[ 2.612873@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.617986@1] nddr valid addr: fffffffffffe0000
[ 2.622492@1] aml_nand_ddr_check 1281 NO ddr exist
[ 2.627262@1] tpl: off 8388608, size 8388608
[ 2.758931@1] Creating 6 MTD partitions on "nandnormal":
[ 2.758980@1] 0x000000800000-0x000001000000 : "tpl"
[ 2.770426@1] 0x000001000000-0x000001200000 : "misc"
[ 2.773515@1] 0x000001200000-0x000002200000 : "recovery"
[ 2.785879@3] 0x000002200000-0x000004200000 : "boot"
[ 2.804976@0] 0x000004200000-0x000004700000 : "config"
[ 2.809675@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.910781@0] nandnormal initialized ok
[ 2.910892@0] aml_ubootenv_init: register env chardev
[ 2.914397@0] aml_ubootenv_init: register env chardev OK
[ 2.919471@0] amlnf_dtb_init: register dtb cdev
[ 2.924192@0] amlnf_dtb_init: register dtd cdev OK
[ 2.928644@0] mtd_nand_probe 267 , err = 0
[ 2.933730@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.939192@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 2.946279@0] unifykey: storage in base: 0xffffffc005000000
[ 2.950805@0] unifykey: storage out base: 0xffffffc005040000
[ 2.956432@0] unifykey: storage block base: 0xffffffc005080000
[ 2.962225@0] unifykey: probe done!
[ 2.966403@0] unifykey: no efuse-version set, use default value: -1
[ 2.971948@0] unifykey: key unify config unifykey-num is 6
[ 2.977468@0] unifykey: key unify fact unifykey-num is 6
[ 2.982683@0] unifykey: unifykey_devno: f200000
[ 2.987701@3] unifykey: device unifykeys created ok
[ 2.992199@3] unifykey: aml_unifykeys_init done!
[ 2.997069@3] sysled: module init
[ 3.000573@3] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.005330@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.012803@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.021585@3] dmc_monitor_probe
[ 3.023953@3] defendkey defendkey: Reserved memory is not enough!
[ 3.028081@3] defendkey: probe of defendkey failed with error -22
[ 3.034459@3] GACT probability NOT on
[ 3.037715@3] Mirror/redirect action on
[ 3.041568@3] u32 classifier
[ 3.044386@3] Actions configured
[ 3.047954@3] Netfilter messages via NETLINK v0.30.
[ 3.053224@3] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.059429@3] ctnetlink v0.93: registering with nfnetlink.
[ 3.065299@3] xt_time: kernel timezone is -0000
[ 3.069024@3] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.075644@3] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.080340@3] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.085844@3] Initializing XFRM netlink socket
[ 3.091352@3] NET: Registered protocol family 10
[ 3.097031@3] mip6: Mobile IPv6
[ 3.097938@3] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.103843@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.111858@3] NET: Registered protocol family 17
[ 3.114145@3] NET: Registered protocol family 15
[ 3.118741@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.131891@3] l2tp_core: L2TP core driver, V2.0
[ 3.136284@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.141197@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.146952@3] l2tp_netlink: L2TP netlink interface
[ 3.151741@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.157838@3] l2tp_debugfs: L2TP debugfs support
[ 3.162341@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.169000@3] NET: Registered protocol family 35
[ 3.173946@3] Key type dns_resolver registered
[ 3.178514@3] Registered swp emulation handler
[ 3.182473@3] Registered cp15_barrier emulation handler
[ 3.187652@3] Registered setend emulation handler
[ 3.192316@3] disable EAS feature
[ 3.196894@1] registered taskstats version 1
[ 3.213459@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.719966@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.720056@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.728351@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.736782@3] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.744242@2] hub 1-0:1.0: USB hub found
[ 3.746724@2] hub 1-0:1.0: 1 port detected
[ 3.751331@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.756352@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.764247@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.773745@3] hub 2-0:1.0: USB hub found
[ 3.776349@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.783632@3] usb usb2: Unsupported the hub
[ 3.788392@3] aml_vrtc rtc: setting system clock to 2024-12-10 04:27:11 UTC (1733804831)
[ 3.796489@3] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d17b000)
[ 3.796566@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.804431@3] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.804443@3] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00bbaf400
[ 3.905008@3] dwc_otg: Core Release: 3.10a
[ 3.905062@3] dwc_otg: Setting default values for core params
[ 3.909250@3] dwc_otg: curmode: 0, host_only: 0
[ 3.913754@3] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.926287@3] dwc_otg: Using Buffer DMA mode
[ 3.926324@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.930233@3] dwc_otg: Working on port type = SLAVE
[ 3.935090@3] dwc_otg: Dedicated Tx FIFOs mode
[ 3.942009@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 3.948792@3] cpucore_cooling_register, max_cpu_core_num:4
[ 3.961210@0] gxbb_pm: enter meson_pm_probe!
[ 3.961268@0] no vddio3v3_en pin
[ 3.962981@0] pm-meson aml_pm: Can't get switch_clk81
[ 3.968007@0] gxbb_pm: meson_pm_probe done
[ 3.972939@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 3.979337@0] Freeing unused kernel memory: 3648K
[ 3.994190@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.245684@1] ubi0: attaching mtd5
[ 4.264220@1] ubi0: scanning is finished
[ 4.269025@3] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.269152@3] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.276210@3] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.283128@3] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.290223@3] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.296297@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.303661@3] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2637894120
[ 4.312937@3] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.322142@1] ubi0: background thread "ubi_bgt0d" started, PID 1076
[ 4.335084@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[ 4.351739@2] UBIFS (ubi0:0): recovery needed
[ 4.391135@2] UBIFS (ubi0:0): recovery completed
[ 4.391434@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.398142@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.408180@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.418402@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.424992@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 4D3C880A-58FD-4FC2-924E-DA4CD7B43DE3, small LPT model
[ 4.449249@2] ubi2: attaching mtd6
[ 5.121507@2] ubi2: scanning is finished
[ 5.128462@3] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.128764@3] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.135822@3] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.142739@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.149835@3] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0
[ 5.156082@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.163442@3] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 424805205
[ 5.172635@3] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4
[ 5.182014@1] ubi2: background thread "ubi_bgt2d" started, PID 1087
[ 5.194798@3] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1091
[ 5.211413@0] UBIFS (ubi2:0): recovery needed
[ 5.269611@0] UBIFS (ubi2:0): recovery completed
[ 5.269913@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"
[ 5.276615@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.286660@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.297490@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.304251@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 34911C95-09FC-4019-B155-86E560615777, small LPT model
[ 5.587138@1] eth0: device MAC address 02:4c:a0:87:70:ca
[ 5.670872@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.672144@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.917146@1] uart_trans: loading out-of-tree module taints kernel.
[ 5.919590@1] register uart_trans chrdev success.
[ 5.922945@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.930536@1] tty port open success [/dev/ttyS3]!
[ 5.935266@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.943642@1] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.949946@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.957417@1] tty port open success [/dev/ttyS2]!
[ 5.962084@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.970470@1] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.976660@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.984804@1] tty port open success [/dev/ttyS1]!
[ 5.988938@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.997344@1] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 6.005060@0] create workqueue success!
[ 7.702055@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.705350@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
===========================================Miner log===========================================
2024-12-10 04:27:18 Open miner sn file /config/sn error
2024-12-10 04:27:18 Miner compile time: Mon Dec 26 17:10:01 CST 2022 type: Antminer BHB42XXX sn :
2024-12-10 04:27:19 This is fix-freq version
2024-12-10 04:27:19 Miner compile time: Mon Dec 26 17:10:01 CST 2022 type: Antminer BHB42XXX
2024-12-10 04:27:19 commit version: f2ab6bc 2022-12-26 17:08:34, build by: jenkins 2022-12-26 17:22:17
2024-12-10 04:27:19 opt_multi_version = 1
2024-12-10 04:27:19 opt_bitmain_ab = 1
2024-12-10 04:27:19 mid_auto_gen = 1
2024-12-10 04:27:19 opt_bitmain_work_mode = 0
2024-12-10 04:27:19 port 439 already exported
2024-12-10 04:27:19 port 454 already exported
2024-12-10 04:27:19 port 440 already exported
2024-12-10 04:27:19 port 455 already exported
2024-12-10 04:27:19 port 441 already exported
2024-12-10 04:27:19 port 456 already exported
2024-12-10 04:27:19 port 438 already exported
2024-12-10 04:27:19 port 453 already exported
2024-12-10 04:27:19 port 446 already exported
2024-12-10 04:27:19 port 445 already exported
2024-12-10 04:27:19 Note: front fan is power on!
2024-12-10 04:27:19 Note: rear fan is power on!
2024-12-10 04:27:19 start the http log.
2024-12-10 04:27:19 httpListenThread start ret=0
2024-12-10 04:27:19 start listen on 6060 ...
2024-12-10 04:27:19 bad chain id = 3
2024-12-10 04:27:22 bad chain id = 3
2024-12-10 04:27:24 ==========================capability start==========================
2024-12-10 04:27:24 board num = 3
2024-12-10 04:27:24 board id = 0, chain num = 1
2024-12-10 04:27:24 chain id = 0
2024-12-10 04:27:24 board id = 1, chain num = 1
2024-12-10 04:27:24 chain id = 1
2024-12-10 04:27:24 board id = 2, chain num = 1
2024-12-10 04:27:24 chain id = 2
2024-12-10 04:27:24 ==========================capability end============================
2024-12-10 04:27:24 chain num = 3
2024-12-10 04:27:24 skip loading levels for now
2024-12-10 04:27:28 load chain 0 eeprom data
2024-12-10 04:27:28 version invalid 5!=4
2024-12-10 04:27:28 version invalid 5!=4
2024-12-10 04:27:28 got nothing
2024-12-10 04:27:32 load chain 0 eeprom data
2024-12-10 04:27:32 version invalid 5!=4
2024-12-10 04:27:32 version invalid 5!=4
2024-12-10 04:27:32 got nothing
2024-12-10 04:27:35 load chain 0 eeprom data
2024-12-10 04:27:35 version invalid 5!=4
2024-12-10 04:27:35 version invalid 5!=4
2024-12-10 04:27:35 got nothing
2024-12-10 04:27:35 Data load fail for chain 0.
2024-12-10 04:27:38 load chain 1 eeprom data
2024-12-10 04:27:38 version invalid 5!=4
2024-12-10 04:27:38 version invalid 5!=4
2024-12-10 04:27:38 got nothing
2024-12-10 04:27:41 load chain 1 eeprom data
2024-12-10 04:27:41 version invalid 5!=4
2024-12-10 04:27:41 version invalid 5!=4
2024-12-10 04:27:41 got nothing
2024-12-10 04:27:44 load chain 1 eeprom data
2024-12-10 04:27:44 version invalid 5!=4
2024-12-10 04:27:44 version invalid 5!=4
2024-12-10 04:27:44 got nothing
2024-12-10 04:27:44 Data load fail for chain 1.
2024-12-10 04:27:48 load chain 2 eeprom data
2024-12-10 04:27:48 version invalid 5!=4
2024-12-10 04:27:48 version invalid 5!=4
2024-12-10 04:27:48 got nothing
2024-12-10 04:27:51 load chain 2 eeprom data
2024-12-10 04:27:51 version invalid 5!=4
2024-12-10 04:27:51 version invalid 5!=4
2024-12-10 04:27:51 got nothing
2024-12-10 04:27:54 load chain 2 eeprom data
2024-12-10 04:27:54 version invalid 5!=4
2024-12-10 04:27:54 version invalid 5!=4
2024-12-10 04:27:54 got nothing
2024-12-10 04:27:54 Data load fail for chain 2.
2024-12-10 04:27:54 Sweep error string = J7:4.
2024-12-10 04:27:54 Fixture data load failed, exit.
2024-12-10 04:27:54 get board name failed for chain:0
2024-12-10 04:27:54 ERROR_SOC_INIT: basic init failed!
2024-12-10 04:27:54 stop_mining: basic init failed!
2024-12-10 04:27:54 ****power off hashboard****
2024-12-10 04:27:55 fail to write 7
2024-12-10 04:27:55 fail to read 0:2
2024-12-10 04:27:55 fail to read 1:2
2024-12-10 04:27:55 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00
2024-12-10 04:27:55 fail to write 7
2024-12-10 04:27:56 fail to read 0:2
2024-12-10 04:27:56 fail to read 1:2
2024-12-10 04:27:56 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00
2024-12-10 04:27:56 fail to write 7
2024-12-10 04:27:56 fail to read 0:2
2024-12-10 04:27:56 fail to read 1:2
2024-12-10 04:27:56 _bitmain_pic_disable_dc_dc_common failed! read_back_data[0] = 0x00, read_back_data[1] = 0x00
2024-12-10 04:33:08 reload pool, need recalculate
2024-12-10 04:33:08 set_start_time_point total_tv_start_sys=361 total_tv_end_sys=362