just did night mode.

its now 23T hast with 425W equaling 17.7J

 r


rejection rate has now reduced to 13%

the best thing is that it has auto on and off , you can put at which time you want the miner to switch on and off.

However the app login for pc is very unfriendly. You have to scan the image that comes in the webpage to authenticate unlike nano3 where you could just type the ip address.

This needs to be reverted back to nano 3 version

Atleast in nano3 you dont need a smartphone but for mini 3 and maybe nano 3s you need a smartphone.

I already have a nano 3 also. Working since nov 16 hours a day med mode doing solo mining BCH. I will first do pool mining with mini 3 then maybe change to solo for BTC or BCH.

The thing is very heavy. If it trips then it has auto cutoff power . They provide 2 power cords also. Heavy 220v power cord with circuit breaker and 120V   power cord with no inbuilt circuit breaker.

the 220v/120v power cord is rated 10amps. I had to order seperate cord as the points are not compatible. i am using 220v.

good thing i had ordered extra eterhnet wire, ej45 adapter, L shaped power cord before.


ALSO i am usinga fridge stabiliser to control erratic voltage wich happens rarely. its rated max 4amps so with 220v*4=920W max capability. 80% rule is 736w. I am using in medium mode. Can you guys give feedback on this?

ping hovers betwwen 69-95ms wired. is this good and good for solo mode? this is the best pool that i found which is closest to my country.