I'd like to order one before taking it apart....what size did you put in to replace your blown capacitor?
 
Edit: It looks like I have 2 vreg's down for some reason. 
Does anyone know the "0,1,2" order on the board? 


 ₿ (21362058) stratum_task: rx: {"result":true,"error":null,"id":5585}
₿ (21362058) stratum_task: message result accepted
₿ (21362098) bm1366Module: Job ID: 70, Core: 35/4, Ver: 0CA98000
₿ (21362098) asic_result: Ver: 2CA98000 Nonce 9D4BA846 diff 287.6 of 1235.
₿ (21362598) TPS546: TPS546_0 - Got Vin: 12.156 V
₿ (21362598) TPS546: TPS546_1 - Got Vin: 12.188 V
₿ (21362598) TPS546: TPS546_2 - Got Vin: 12.188 V
₿ (21362598) TPS546: TPS546_0 - Got Vout: 1.195 V
₿ (21362608) TPS546: TPS546_0 - Got Iout: 21.312 A
₿ (21362618) TPS546: TPS546_1 - Got Vout: 0.047 V
₿ (21362618) TPS546: TPS546_1 - Got Iout: -0.227 A
₿ (21362628) TPS546: TPS546_2 - Got Vout: 0.045 V
₿ (21362628) TPS546: TPS546_2 - Got Iout: -0.292 A
₿ (21362638) TPS546: TPS546_0 - Got Temp: 48
₿ (21362638) TPS546: TPS546_1 - Got Temp: 38
₿ (21362648) TPS546: TPS546_2 - Got Temp: 36
₿ (21362648) power_management: Temp: 40.0°C, SetPoint: 60.0°C, Output: 25.0%
₿ (21362658) TPS546: Status: 0x4851
₿ (21362658) TPS546: The voltage regulator is turned off
₿ (21362668) TPS546: An output overcurrent fault has occurred
₿ (21362678) TPS546: TPS546 IOUT Status: A0
₿ (21362678) TPS546: IOUT Overcurrent Fault
₿ (21362678) TPS546: IOUT Overcurrent Warning
₿ (21362688) TPS546: The output voltage is NOT within the regulation window. PGOOD pin is asserted.
 

I'd like to order one before taking it apart....what size did you put in to replace your blown capacitor?