Hey Daliss! The update from f@h to the Curecoin folding pool (cryptobullionpools.com) occurs once every 24 hours. 
For your rigs, those projects are very similar, and shouldn't be showing that discrepancy. Has this changed? If not, check the logs, and manually calculate the TPF by looking at the difference between timestamps on two messages from the same FS0x saying a new percent has completed, and compare that to the other rig. If those are similar, you should be fine and the PPD calculation is just off for now. If they are drastically different, then one machine is running significantly slower.
For a failed GPU, try restarting the computer, though that sounds like the driver is reporting a bad/failing GPU. Does mining work alright on that card?
For your rigs, those projects are very similar, and shouldn't be showing that discrepancy. Has this changed? If not, check the logs, and manually calculate the TPF by looking at the difference between timestamps on two messages from the same FS0x saying a new percent has completed, and compare that to the other rig. If those are similar, you should be fine and the PPD calculation is just off for now. If they are drastically different, then one machine is running significantly slower.
For a failed GPU, try restarting the computer, though that sounds like the driver is reporting a bad/failing GPU. Does mining work alright on that card?
The failed gpu is mining fine so I don't get it, I removed it from slots for the moment.
Two more important questions :
- Can I switch easily from folding to mining? Can I pause folding and launch mining at any time?
- Is there anyway to remotely control several folding machines?
I guess you can just pause the folding and put your gpus to mining. But you might lose out a few points for QRB? (quick return bonus) Someone more knowledgeable can advise.
Using FAHControl you can remote control your folding machines.