anyone have specs antminer vs av16?
av16 is supposed to draw 4A at conservative settings and upto 6.5A at maximum safe settings per
http://drillbitsystem.com/forum/index.php?topic=309.0.
I estimate that a single board takes about 5-6A when doing 22 GH/sec. At 5A it will be 5*12=60W, so 22/60=0.367 GH/W. (probably need to add a few Watts for the essential fans).
The Antminer S1 at default settings does 180 GH and takes 360W at the wall, which makes 0.5 GH/W. This suggests that the S1 is slightly more efficient, however both are significantly less efficient than the S2 or Spondoolies SP10.
Cheers
running my Eight:int:52:2:950,Av16:int:750:1:1000 192W+180W =372Wplus fans say 380W so techincally a 450W psu should be ok...but on psu the sticker 428W is for +12V 25A and 22W for -12V 0.8A
would this psu with it's 20awg wires work? since its got 3cables i can use 4 if i steal one from the mb plug