I have just received my new Ant S1's trying to connect them to my node on the local network I have setup the following 3 pools
Pool 1 192.168.1.20:9332
Pool 2 100.166.178.107:9332
pool 3 us2.eclipsemc.com:3333
but when the S1 connects is goes straight to pool 3 why won't it connect to my node on the local network, under the mining status tab the first 2 pools aren't in the list only pool 3 as alive, is there a setting I have missed.
I use:
http://192.168.0.194:9332so, try putting the http:// in front of it.
M
No still not working on my node, the pool 2 is now showing up in the Miner Status as Dead which is correct as it is my mates pool and it is down at the minute, but my node isn't even showing up. The only settings I changed is the IP the gateway and DNS ip's to point to my router under network/ WAN I haven't changed anything under the LAN tab that is just left on default which is protocol DHCP client
sounds like a routing problem? What happens if you put
http://192.168.1.20:9332 in your browser?
M
I get my node webpage. I have been mining with Antminer U1's for a few months now without a problem I can ping 192.168.1.20 from the network/diagnostics tab on the Ant S1 and it finds it
It won't connect to any p2pools I've tried a few and no connection, my mate had the same problem with his S1's in Houston Texas, will only connect to mining pools, so there must be a setting within the S1 that needs fixing