Re: Raspberry Pi with cgminer hangs after a little while or few hours
Have the same problem with self-compiled cgminer under Raspberry Pi. However, there is a precompiled binary:
Any chance of a Pi image with compiled binary?
Here's a compiled binary built on raspbian: https://db.tt/UygLkqwd
this binary works fine stable day by day, week by week without interuptions. But have two dissapointes: 1. frequency is only up to 950 Mhz, 2) stratum above the target nonce issue. As a result, this is very good miner for non-overclocking Gridseeds connected directly to mining pools.
But in the case you are going to overclock your GC3355 over 1000MHz the best miner is cpuminer (minerd): https://github.com/siklon/cpuminer-gc3355. Possibly with Minera or something similar to control the farm.
If you don't want to run a bunch of cpuminers, I have posted modified cgminer sources to allow LTC-only mode: https://github.com/dtbartle/cgminer-gc3355. I have this running on a Raspberry Pi with 10 devices.
Any chance of a Pi image with compiled binary?
Here's a compiled binary built on raspbian: https://db.tt/UygLkqwd
this binary works fine stable day by day, week by week without interuptions. But have two dissapointes: 1. frequency is only up to 950 Mhz, 2) stratum above the target nonce issue. As a result, this is very good miner for non-overclocking Gridseeds connected directly to mining pools.
But in the case you are going to overclock your GC3355 over 1000MHz the best miner is cpuminer (minerd): https://github.com/siklon/cpuminer-gc3355. Possibly with Minera or something similar to control the farm.