aChingCoinDev does it work if you bypass the config file and run a minimal .bat file? e.g.
minerd-gc3355 --freq=850 --gc3355-detect --url=stratum+tcp://us-east.multipool.us:7777 --userpass=brandonb01.1:x
pause
It statts up, gets work, but then does not do anything:
cpuminer-gc3355 (v1.0d) - Started: [2014-05-22 20:32:07]
================================================================================
(2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0
Connected to us-east.multipool.us:7777 diff 64 with stratum as user brandonb01.
================================================================================
GSD 0: 8D9117765449 | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 1: 8D76576C5355 | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
================================================================================
[2014-05-22 20:32:07] Starting Stratum on stratum+tcp://us-east.multipool.us:7
777
[2014-05-22 20:32:07] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-05-22 20:32:07] 0: Open device \\.\COM3
[2014-05-22 20:32:07] 0: Terminating GC3355 chip mining thread
[2014-05-22 20:32:07] 1: GC3355 chip mining thread started, in SINGLE mode
[2014-05-22 20:32:07] 1: Open device \\.\COM3
[2014-05-22 20:32:07] 1: Terminating GC3355 chip mining thread
[2014-05-22 20:32:08] Stratum detected new block
[2014-05-22 20:32:08] New Job_id: 62e9 Diff: 2048 Work_id: 97084a27
[2014-05-22 20:32:58] New Job_id: 62ea Diff: 64 Work_id: 97084a27
You have to let it sit for about five minutes the HR will climb. Try it. I see 0 for MHz. HMM.