Dead die?
This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
My past charm on that:This is an October Jupiter that's been running from 24/7. Noticed I have a dead die. I already increased the SPI voltage all the way up to 3.3V and it wouldn't kick it on. Then I slowly increased the individual die voltage to the MAX, which is +.1465. Didn't awake up the die either. Is there anything else that can be done to kick this die on? I would really thought that the rig would last a lot longer then 8 months.
Block the heatsink fan on that pcb with a piece of cardboard until your temp reads 80C, and if that doesn't kick it on, keep the temp @ 80 while lowering the voltage. once it kicks on, keep the temp adjusted to between 70 and 80