I left my Pi plugged in but jacked the Fury to a PC because I don't want to wait anymore. Plug it in then do the USB. It will fail to install drivers so head over here:
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspxInstall the right one for Windows and you should be good to go. Make yourself a .bat file for cgminer and you should do fine from there. Fury has 6 chips so you need to change that and also enter your COM port found in device manager. Here's the example from GAW:
cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 128 --ltc-clk 328 -S //./COM4
Performance right now:
avg MHs: 1.228 WU: 1333.1
I'm mining at Clever.
I am also going with direct cgminer until zenminer is up, but getting way too many invalids and hardware errors. Are you getting hardware errors.
15 hardware errors on 195 accepted. I am using the Fury at 6 chips.