Re: GAWMiners.com - NEXT GEN ASIC

Hi

can anybody please help me I have just received my fury today but no zencontroller yet. I have no idea how to run it with cgminer3.1.1 I have the right driver installed but I do not know how to build a miner. when I had gridseeds I just watched some youtube tutorials and downloaded cgminer and it was ready to use. can anybody please help it will be much appreciated

create a miner.bat file in inside the cgminer folder. Copy the code below into the .bat file and change the pool address, user name and password to match where you want to mine. Open device manager and find the com port of the fury, change the COM port in .bat file to match.

Save and double click the miner.bat file.

example:
cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4

When you created the bat fie did you change the comport in it. Change com4 to com17
thanks but still having no luck I got cgminer from https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241
I don't know what else I need to do I soon as I open the bat file it closes again any other ideas? thanks again

Download and insall Silicone Labs CP210 Windows Drivers for the device here:

http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Reboot and try again.

thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work

On the end of the bat file did you change com4 to com17
[/quote]

yes think I have it sorted now the problem was I didn't put the windows file in with the cgminer file wouldn't of figured that out without the pause function many thanks. does anybody how I can post a image to see if this is how it should be?