info of my experiences so far

Corsair h100 with stock fans

standard MinePeon Version 0.2.4.6 image running on RiPi

) had to switch the miner from bfgminer to cgminer 4.0.1 to get it to work, but it's not a version that supports all the hashfast features.  I gather I can get an enhanced version somewhere?

) evenly tightened the cooler nuts, tight, but not too tight.  waiting for release of the tool to fine tune the temperature/nuts.

) 4: HFB 0: 650MHz  93C 100% 0.87V  | 603.4G/629.0Gh/s | A:294297 R:14772 HW:1301 WU: 8751.2/m

) couldn't get 4 chilies and one haspanero to be recognized and running by minepeon.  finally figured out I had to sequence the power up.  turn on the chilies and wait for them to finish their boot.  turn on the haspanero and wait for their boot.  THEN turn on the RiPi.

What temperature should these be running at?  is 93C at 650Mhz way hot?
What components other than the ASICs need to be kept cool for max speed? i.e. is it worth it blowing air on top or bottom of the board?

ADVthaAnksNCE