Another Problem.

Seams like cpuminer doesn´t detect the blades correctly. Sometimes i have to restart the miner several times, to get them all running.

[2014-06-06 19:39:17] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 0: Open device /dev/ttyACM15
[2014-06-06 19:39:17] 1: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 1: Open device /dev/ttyACM14
[2014-06-06 19:39:17] Stratum detected new block
[2014-06-06 19:39:17] New Job_id: 90fe Diff: 512 Work_id: fcc59b85
[2014-06-06 19:39:17] 2: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 2: Open device /dev/ttyACM13
[2014-06-06 19:39:17] 3: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 3: Open device /dev/ttyACM12
[2014-06-06 19:39:17] 4: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 4: Open device /dev/ttyACM11
[2014-06-06 19:39:17] 5: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 5: Open device /dev/ttyACM10
[2014-06-06 19:39:17] 6: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:17] 6: Open device /dev/ttyACM3
[2014-06-06 19:39:18] 7: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 7: Open device /dev/ttyACM2
[2014-06-06 19:39:18] 8: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 8: Open device /dev/ttyACM9
[2014-06-06 19:39:18] 9: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 9: Open device /dev/ttyACM8
[2014-06-06 19:39:18] 10: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 10: Open device /dev/ttyACM7
[2014-06-06 19:39:18] 11: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 11: Open device /dev/ttyACM6
[2014-06-06 19:39:18] 12: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 12: Open device /dev/ttyACM5
[2014-06-06 19:39:18] 0: Firmware version: 0x17031402
[2014-06-06 19:39:18] 0: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:18] 0: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:18] 13: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 13: Open device /dev/ttyACM4
[2014-06-06 19:39:18] 1: Firmware version: 0x17031402
[2014-06-06 19:39:18] 1: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:18] 1: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:18] 14: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 14: Open device /dev/ttyACM1
[2014-06-06 19:39:18] 2: Firmware version: 0x17031402
[2014-06-06 19:39:18] 2: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:18] 2: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:18] 15: GC3355 chip mining thread started, in SINGLE mode
[2014-06-06 19:39:18] 15: Open device /dev/ttyACM0
[2014-06-06 19:39:18] 3: Firmware version: 0x17031402
[2014-06-06 19:39:18] 3: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:18] 3: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 4: Firmware version: 0x17031402
[2014-06-06 19:39:19] 4: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 4: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 5: Firmware version: 0x17031402
[2014-06-06 19:39:19] 5: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 5: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 6: Failed reading firmware version
[2014-06-06 19:39:19] 7: Firmware version: 0x17031402
[2014-06-06 19:39:19] 6: Firmware version: 0xffffffff
[2014-06-06 19:39:19] 7: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 6: Unknown GC3355 Miner detected (chips=5)
[2014-06-06 19:39:19] 7: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 6: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 8: Firmware version: 0x17031402
[2014-06-06 19:39:19] 8: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 8: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 9: Firmware version: 0x17031402
[2014-06-06 19:39:19] 9: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 9: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 10: Failed reading firmware version
[2014-06-06 19:39:19] 11: Firmware version: 0x17031402
[2014-06-06 19:39:19] 10: Firmware version: 0xffffffff
[2014-06-06 19:39:19] 11: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 10: Unknown GC3355 Miner detected (chips=5)
[2014-06-06 19:39:19] 11: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 10: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 12: Firmware version: 0x17031402
[2014-06-06 19:39:19] 12: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 12: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:19] 13: Firmware version: 0x17031402
[2014-06-06 19:39:19] 13: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:19] 13: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:20] 14: Firmware version: 0x17031402
[2014-06-06 19:39:20] 14: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:20] 14: Set GC3355 core frequency to 840Mhz
[2014-06-06 19:39:20] 15: Firmware version: 0x17031402
[2014-06-06 19:39:20] 15: GC3355 40-chip G-Blade Miner detected
[2014-06-06 19:39:20] 15: Set GC3355 core frequency to 840Mhz